Disclosure: As an Amazon Associate, we earn from qualifying purchases. If you click a link on this page and make a purchase, we may receive a small commission at no extra cost to you.
Exposed rear wheel wells can collect mud, road salt, gravel, and spray around parts you would rather keep cleaner and better protected. The Husky Liners Wheel Well Rear Guards 79061 are a vehicle-specific, two-piece rear liner set for 2019–2026 Chevrolet Silverado 1500 trucks, with important fitment exclusions you need to check before ordering. Their main strengths are tough all-weather thermoplastic construction, a molded factory-style fit, simple cleaning, and installation that uses existing mounting points on supported applications. The main drawback is equally clear: these guards are not a universal Silverado accessory, so trim and configuration verification matters more than the product’s basic installation difficulty.
Quick Verdict
Rating: 8.5/10, Recommended with caveats
Best For: Silverado 1500 owners who want molded rear wheel-well coverage against rocks, mud, snow, salt, and road debris.
Bottom Line: Husky Liners 79061 gives you durable, low-maintenance rear wheel-well protection with a clean black finish and vehicle-specific fit. It is a strong choice when your truck matches the listed application, but buyers with excluded trims or modified rear-wheel-well setups should confirm compatibility first.
| Specification | Detail |
|---|---|
| Brand | Husky Liners |
| Model / part number | 79061 |
| Product type | Rear wheel well guards / liners |
| Quantity | Rear pair, two pieces |
| Material | Impact-resistant, all-weather thermoplastic |
| Color | Black |
| Listed dimensions | About 40 × 27.63 × 17.5 inches |
| Listed weight | About 11 lb on the Amazon listing |
| Compatibility | 2019–2026 Chevrolet Silverado 1500, subject to listed trim exclusions |
| Listed exclusions | ZR2, LT, and Custom Trail Boss |
| Installation | Vehicle-specific mounting using factory locations and included hardware as applicable; no drilling on most applications |
| Warranty | Limited lifetime warranty for the original purchaser under stated terms |
| Made in | USA |
What Are the Husky Liners Wheel Well Rear Guards 79061?
Husky Liners 79061 is a molded rear wheel-well guard set designed for specific Chevrolet Silverado 1500 applications. You get a driver-side and passenger-side liner that sit inside the rear wheel openings, creating a barrier between road spray and the exposed areas behind the wheels.
The product is built from impact-resistant, all-weather thermoplastic and uses a black finish that gives the wheel well a more complete, factory-style appearance. Husky positions the guards as protection against rocks, mud, snow, salt, dirt, and other debris while keeping cleanup simple because the liners can be sprayed down.
Key Takeaways
- Model 79061 is a rear pair designed for 2019–2026 Chevrolet Silverado 1500 applications, with listed exclusions for ZR2, LT, and Custom Trail Boss.
- The all-weather thermoplastic construction is designed to take impacts from road debris and tolerate dirty, wet conditions.
- The molded liners cover exposed wheel-well areas and help keep mud, snow, salt, and gravel away from surfaces behind the rear tires.
- Installation uses vehicle mounting points and included hardware as applicable, with no drilling required on most supported applications.
- Maintenance is simple: rinse away accumulated grit and periodically inspect the fasteners and liner edges.
- Warranty coverage is limited lifetime coverage under Husky Liners’ stated terms, so it should not be treated as an unlimited damage guarantee.
Before You Buy: Verify your exact year, trim, and rear wheel-well configuration. The Amazon listing for model 79061 specifically excludes ZR2, LT, and Custom Trail Boss, and aftermarket flares, hitch hardware, suspension changes, or other wheel-well modifications can also affect physical clearance.
Who Should Buy It?
Best For
- Silverado 1500 owners who drive on salted winter roads, gravel, mud, or dirty job sites.
- Owners who want to cover exposed rear wheel-well areas with a molded black liner instead of leaving the underbody visible.
- DIY buyers who prefer a vehicle-specific accessory that uses existing mounting locations rather than a universal liner that needs trimming.
Skip If
- Your truck is one of the excluded trims listed for this part number.
- Your rear wheel wells contain non-factory hardware or modifications that may interfere with a molded liner.
- You need front inner-fender protection, because model 79061 is a rear wheel-well product.
Design, Fitment, and Materials
Fit and Compatibility
The strongest reason to choose a molded wheel-well liner is fit. Model 79061 is shaped for the rear wheel openings of supported Silverado 1500 trucks rather than being a generic sheet you cut to size. Correct fit helps the liner sit close to the body, keeps the wheel well looking finished, and places the mounting holes where they can use the truck’s existing attachment points.
Compatibility is also the biggest risk. The current Amazon product title lists 2019–2026 Chevrolet Silverado 1500 fitment but excludes ZR2, LT, and Custom Trail Boss. You should compare the listing fitment with your exact truck before ordering, especially if you have factory or aftermarket wheel-well liners, fender flares, hitch components, or suspension modifications.
Materials and Build
Husky uses an impact-resistant, all-weather thermoplastic for these guards. That material choice makes sense in a wheel well because the liner has to handle wet grit, small stones, road salt, temperature swings, and repeated spray without needing the care of a painted metal panel.
The black finish also serves a practical purpose. It hides the visual clutter of exposed wheel-well components and gives the rear arches a more complete appearance. The guards are sold as a pair, so both rear sides receive matching coverage.
Protection Against Road Debris
The guards form a physical barrier between the rear tires and surfaces behind the wheel openings. They are intended to reduce direct exposure to rocks, dirt, mud, snow, salt, and road debris. That does not make the truck corrosion-proof, but it can reduce how much material is thrown directly onto hidden areas during normal driving.
Husky also markets the liners as a way to reduce road noise from flying rocks and debris. The effect will depend on tires, road surface, and cab insulation, so noise reduction is best viewed as a secondary benefit rather than the main reason to buy them.
Installation, Maintenance, and Warranty
Installation
The installation process is straightforward for a vehicle-specific accessory. Husky’s instructions call for cleaning the rear fender wells first, positioning the correct driver-side and passenger-side guards, aligning the preformed mounting points, and using factory fasteners or supplied hardware depending on how the truck was equipped.
The installation guide indicates that tire removal is not necessary for this application. Basic hand tools are still useful, including a T-10 Torx driver on trucks that have factory wheel-well liners. The original article estimated roughly 30–45 minutes for both sides, which is reasonable as a planning estimate, but actual time will vary with factory liners, dirt buildup, and hardware condition.
Pro Tip: Wash and dry the wheel wells before you start, then loosely start every fastener before final tightening. This makes it easier to align the molded liner without forcing one mounting point out of position.
Cleaning and Maintenance
Maintenance is one of the easiest parts of ownership. Rinse the liners with water to remove loose mud, sand, and salt. If grime remains, use a mild automotive-safe cleaner and a soft brush or cloth, then rinse again.
During seasonal tire changes or routine washes, inspect the liner edges and fasteners. A wheel-well liner works best when it stays secure and does not rub against the tire or other moving parts.
Warranty Coverage
Husky Liners lists a limited lifetime warranty for its Wheel Well Guards. The manufacturer states that coverage applies to the original purchaser and addresses breaking or tearing under normal usage during the life of the vehicle in which the product is installed. Warranty terms and exclusions can change, so keep your purchase record and review the current written warranty if coverage is important to your decision.
How It Performs in Real Use
Daily Commuting
On paved roads, the guards mainly keep routine water spray, grit, and small debris from directly striking exposed rear wheel-well areas. You may also prefer the cleaner black appearance when looking through the wheel opening, especially on trucks that show frame or body surfaces behind the tire.
Winter Roads and Road Salt
Snow, slush, and salt are where this type of accessory makes the most practical sense. The liner provides a removable, washable barrier that takes the first hit from salty spray. You still need to wash the truck regularly because moisture and salt can reach areas around the liner, but cleanup is easier when much of the debris lands on a smooth thermoplastic surface.
Gravel Roads, Job Sites, and Light Off-Road Use
On gravel or muddy roads, rear tires can throw stones and clumps of dirt into the wheel housing. The impact-resistant thermoplastic is designed for this kind of debris exposure. The liner does not replace skid plates or protect every underbody component, but it adds useful coverage in the rear wheel wells.
Long-Term Ownership
Long-term value comes from simple materials and low maintenance. There are no electronics, moving parts, or coatings that need regular service. The key is to keep the liners clean, make sure fasteners remain secure, and avoid assuming that the guard eliminates the need to inspect the metal and components around it.
Compatibility and Installation Safety
Before installation, park on a stable, level surface and follow the supplied instructions for your truck. Do not work near a hot exhaust component, and do not install the guard where it contacts the tire, suspension, brake lines, wiring, or other moving or heat-sensitive parts.
Modified trucks need extra attention. Larger tires, aftermarket flares, wheel spacers, lift components, fifth-wheel or gooseneck hardware, and other accessories can change available space. A dry fit before tightening hardware is the safest way to catch interference.
Pros and Cons
Pros
- Vehicle-specific molded design for supported Silverado 1500 rear wheel wells.
- Impact-resistant, all-weather thermoplastic is suited to mud, snow, salt, and road debris.
- Sold as a matching rear pair with a clean black finish.
- No drilling is required on most supported applications.
- Simple hose-down cleaning and limited lifetime warranty coverage.
Cons
- Not compatible with every Silverado 1500 trim listed under the same model years.
- Modified wheel wells may require extra fitment checks before installation.
- Rear-only coverage does not replace broader underbody protection or routine corrosion-prevention cleaning.
Is It Worth the Price?
Husky Liners 79061 sits in the category of purpose-built truck protection rather than cosmetic trim alone. You are paying for molded vehicle-specific coverage, durable thermoplastic construction, included mounting hardware where applicable, USA manufacturing, and limited lifetime warranty support.
It offers the most value if your Silverado regularly sees winter salt, muddy roads, gravel, construction sites, or other conditions that make the rear wheel wells dirty. It is less compelling if your truck already has effective factory rear liners or if your trim is excluded, because correct fit is more important than the brand name or material.
How It Compares to Alternatives
Rough Country offers rear wheel-well liners for 2019–2026 Silverado 1500 models, also using a vehicle-specific bolt-on approach. That option is worth comparing if you want another molded liner with broad model-year coverage.
Rugged Liner also sells Silverado rear wheel-well liners with HDPE construction and a no-drill design, but its compatibility notes differ from Husky’s. Husky 79061 makes the most sense when you prefer Husky’s thermoplastic liner, current fitment matches your truck exactly, and the limited lifetime warranty is valuable to you.
Frequently Asked Questions
Which Silverado 1500 models fit Husky Liners 79061?
The current Amazon listing states fitment for 2019–2026 Chevrolet Silverado 1500 trucks and specifically excludes ZR2, LT, and Custom Trail Boss. Always check your exact year and trim before ordering because a model-year match alone is not enough.
Do I need to drill holes to install these wheel-well guards?
Husky says no drilling is required on most applications. The guards are designed to align with factory mounting locations and use existing or supplied fasteners depending on how the truck was equipped.
Do I need to remove the rear tires for installation?
The installation instructions for this part indicate that tire removal is not necessary. You still need enough room to position the liner and reach the mounting points safely.
Will the guards fit with aftermarket fender flares?
That depends on the flare design and mounting hardware. Because Husky’s liner is molded around factory wheel-well geometry, dry-fit both parts and check for shared fastener locations or interference before tightening anything.
Do the liners prevent rust?
They help shield exposed areas from direct hits of mud, snow, salt, and debris, but they do not make the wheel well rust-proof. Regular washing and inspection are still important, especially in regions that use road salt.
How should I clean Husky wheel-well guards?
Rinse loose dirt and salt with water. For stubborn grime, use a mild automotive-safe cleaner, rinse thoroughly, and inspect the mounting points while the wheel well is clean.
What does the Husky Liners warranty cover?
Husky lists a limited lifetime warranty for Wheel Well Guards. The stated warranty applies to the original purchaser and covers breaking or tearing under normal usage during the life of the vehicle, subject to the manufacturer’s full warranty terms.
Who should skip model 79061?
Skip it if your truck falls under the listed trim exclusions or if rear-wheel-well modifications prevent a clean molded fit. It is also unnecessary if you already have satisfactory factory liners and do not need additional rear coverage.
The Bottom Line
Husky Liners Wheel Well Rear Guards 79061 are a solid choice for compatible Silverado 1500 owners who want durable, washable rear wheel-well coverage against everyday road debris and harsh weather. Their main strengths are molded fit, tough thermoplastic construction, simple maintenance, and straightforward installation, while the main limitation is trim-specific compatibility. If your truck matches the listed application and you want cleaner, better-covered rear wheel wells, this is an easy product to recommend with fitment caveats.
