The FEL-PRO MS 97220 gasket set is presented as a thorough sealing solution for many Nissan and INFINITI engines, covering model years roughly 2007–2024. It features multi-layer materials, intake plenum gaskets, throttle body seals, and precise fit tolerances, typically matching OEM dimensions within ±0.5 mm; installation requires basic hand tools, torque specs, and surface prep. What vehicles exactly fit, what’s included, and how it performs under boost are worth a closer look.
Key Takeaways
- Fits many Nissan/INFINITI engines (2007–2024) — verify exact year, make, model, engine, and trim with Amazon Confirmed Fit.
- Multi-layer steel, silicone beads, and 3–6 mm bead diameters provide strong sealing against surface irregularities.
- Complete intake plenum kit includes gaskets, throttle body seals, O-rings, silicone beads, and small fastener washers.
- Installation requires clean mating surfaces, torque to OEM windows (studs 8–12 ft·lb, main bolts 18–25 ft·lb), and correct torque sequence.
- Inspect annually, replace at 60–100k miles, and confirm included parts match vehicle to avoid fitment issues.
Product Fit and Vehicle Compatibility
Fit matters. The FEL-PRO MS 97220 fits specific vehicle models — Nissan Altima (2007–2018), Maxima (2009–2020), Murano (2009–2024), Pathfinder (2013–2020), Quest (2011–2017), INFINITI JX35 (2013), QX60 (2014–2016).
Fit matters — FEL-PRO MS 97220 specifically fits select Nissan/INFINITI models from 2007–2024; verify your year and model.
Compatibility verification is required before purchase; use the Amazon Confirmed Fit tool, enter year, make, model, engine, trim.
Q: What measurements matter?
A: Bolt hole spacing, port alignment, overall gasket outline — measure to ±0.5 mm where possible.
Practical considerations: inspect mating surfaces, confirm included parts, note any vehicle-specific notes.
Conclusion: verify fit, then proceed with confidence.
Design, Materials, and Sealing Performance
Having confirmed vehicle compatibility and measured mating surfaces, attention turns to what makes the FEL-PRO MS 97220 perform: its design, materials, and sealing approach.
The set uses sealing technologies and proprietary materials to tolerate surface irregularities, with silicone beads, multi-layer steel where needed, and compression-controlled sections.
What are key specs? Gasket thickness ranges 0.8–2.5 mm depending on location, bead diameters 3–6 mm, torque windows matched to OEM.
How does it seal? Controlled compression, material memory, and surface coatings create barriers against vacuum and fluid leaks.
Practical note: inspect surfaces, replace warped flanges, follow torque sequence for reliable results.
What’s Included and Installation Considerations
The FEL-PRO MS 97220 kit arrives as a complete intake plenum gasket set, containing all primary sealing components required for a typical replacement: intake plenum gasket(s), throttle body seal(s), O-rings, silicone beads, mounting gaskets and any small fastener washers specified by Fel-Pro.
The package supports liberation from roadside breakdowns by enabling confident DIY work.
What’s included? Gasket, seals, beads, hardware.
Installation tips: clean mating surfaces, torque bolts to spec (8–12 ft·lb for studs, 18–25 ft·lb for main bolts), replace vacuum O-rings (5–12 mm IDs).
Gasket maintenance: inspect annually, replace at 60–100k miles, store parts dry.
Frequently Asked Questions
Does This Gasket Set Include Torque Specifications or a Service Manual?
No — the set does not include torque specifications or a service manual. It provides gaskets and parts only; the liberated user is urged to obtain factory torque specifications and a service manual independently to reclaim mechanical autonomy.
Are Any O-Rings or Grommets Sold Separately?
Yes — some o-rings and grommets are sold separately. Like pruning vines to free growth, buyers should check o ring specifications and gasket materials; confirm included parts via fitment notes and product descriptions before purchase.
Is a Dealer Reflash or ECU Reset Required After Installation?
No dealer reflash or ecu reset is typically required after installation; the independent installer recommends freedom from unnecessary dealer dependence, though a cautious user might perform an ECU reset to guarantee adaptive settings clear and embrace mechanical autonomy.
What Is the Warranty Period and How Do I Make a Claim?
The warranty details state a limited lifetime warranty; to pursue freedom, the claimant follows the claim process: retain proof of purchase, contact Fel‑Pro or the seller, submit documentation, and request repair, replacement, or refund per terms.
Are These Gaskets Compatible With Aftermarket Intake Manifolds?
Like a key fitting a new lock, the set generally supports gasket compatibility with many aftermarket modifications, though users seeking liberation from limits should verify flange dimensions and sealing surfaces; mismatched manifolds may still require tailored gaskets or machining.
Conclusion
The Fel-Pro MS 97220 gasket set fits many 2007–2024 Nissan and INFINITI models, offering precise sealing with multi-layer materials and silicone-coated beads. It includes intake plenum gaskets, throttle body seals, and all necessary O-rings; note thicknesses and diameters match factory specs, ensuring proper compression and torque tolerances. Installation is straightforward with basic tools, but inspect surfaces, replace fasteners if damaged, and follow manufacturer torque sequences. Reliable choice that performs like a trusted safeguard.
