Disclosure: As an Amazon Associate, we earn from qualifying purchases. If you click a link on this page and make a purchase, we may receive a small commission at no extra cost to you.
KEMIMOTO Motorcycle & ATV Cup Holder Review
Loose bottles and open cups can turn a simple ride into a messy problem. You need a holder that grips your bar securely, holds a large drink, and stays easy to remove when the ride ends. This KEMIMOTO Motorcycle & ATV Cup Holder review explains what it does well, where it has limits, and who should buy it.
Our Verdict
Rating: 8.2/10, Recommended with caveats
Best For: Motorcycle, ATV, UTV, scooter, kayak, boat, bike, and walker users who need a 32 oz soft cup holder for 0.6 to 1.5 inch bars.
Bottom Line: The KEMIMOTO Motorcycle & ATV Cup Holder gives you a large 32 oz capacity, 600D Oxford fabric, and a tool-free alligator clamp. You should skip it if your bar is thicker than 1.5 inches or you need a fully waterproof hard-shell holder.
How We Reviewed This Product
We checked the live Amazon listing, product details, material claims, fit range, capacity, and manufacturer information before editing this review. We also checked the article for duplicate disclosure blocks, weak claims, CTA placement, and buyer-focused gaps.
| Specification | Detail |
|---|---|
| Brand | KEMIMOTO |
| Product Name | KEMIMOTO Motorcycle & ATV Cup Holder, 32 oz Drink Holder with Alligator Clamp |
| Material | 600D Oxford fabric with aluminum foil lining |
| Dimensions | 3.9 inches long, 3.9 inches wide, and 7.8 inches high |
| Capacity | Holds bottles, cans, and cups up to 32 oz |
| Handlebar Fit | Fits poles and handlebars from 0.6 to 1.5 inches in diameter |
| Clamp Design | Alligator clamp with two screws, one gasket, one rubber pad, and anti-scratch Velcro |
| Front Pocket | 5.5 inch front pocket for keys, cards, cash, or small ride items |
| Compatible Uses | Motorcycles, ATVs, UTVs, scooters, kayaks, boats, bikes, walkers, and similar round bars |
| Color and Variants | Amazon listing reviewed in black. Manufacturer variants may include black, blue, gray, medium, large, and two-pack options. |
Key Takeaways
- The 600D Oxford fabric gives you a soft but durable holder for motorcycle, ATV, UTV, scooter, kayak, boat, bike, and walker use.
- The alligator clamp fits bars from 0.6 to 1.5 inches in diameter, so you should measure your handlebar before you buy.
- The 32 oz capacity handles large bottles, cans, stainless steel bottles, and travel cups better than many small plastic holders.
- The 7.8 inch height and 5.5 inch front pocket make it useful for drinks, keys, cash, cards, and small ride items.
- The aluminum foil lining helps with cleaning and short-term temperature retention, but this holder is not a true insulated cooler.
What Is the KEMIMOTO Motorcycle & ATV Cup Holder?
The KEMIMOTO Motorcycle & ATV Cup Holder is a soft universal drink holder for round bars, handlebars, and poles. It uses 600D Oxford fabric instead of a hard plastic or metal basket. That design gives you a lighter holder with more flexibility for bottles, cans, and larger travel cups.
The main selling point is the 32 oz capacity matched with a 0.6 to 1.5 inch clamp range. You can use it on motorcycles, ATVs, UTVs, scooters, kayaks, boats, bikes, walkers, and similar setups. The holder also includes a 5.5 inch front pocket, which gives you a small storage spot for items you need close by.
The clamp uses two screws, one gasket, one rubber pad, and anti-scratch Velcro to improve grip. The hand-screw design lets you install or remove it without a tool. That matters if you switch the holder between a motorcycle, boat rail, stroller, walker, or golf push cart.
Who Should Buy the KEMIMOTO Cup Holder?
Who It’s For
- Riders who want a 32 oz drink holder for motorcycle, ATV, UTV, scooter, bike, kayak, or boat use.
- Owners with round bars between 0.6 and 1.5 inches who want simple tool-free installation.
- People who want a soft holder with a 5.5 inch pocket for keys, cards, cash, or small accessories.
Who Should Skip It
- You should skip it if your handlebar, rail, or pole measures more than 1.5 inches in diameter.
- You should choose another option if you need a fully waterproof, hard-shell, locking drink mount.
- You may prefer a metal basket holder if you ride hard trails and want a rigid open-frame design.
Feature-by-Feature Review
Design and Build Quality
The KEMIMOTO cup holder uses 600D Oxford fabric, aluminum foil lining, and a reinforced alligator clamp. The fabric gives you better flexibility than a rigid metal holder. It also reduces the chance of rattling against a bottle on normal road or trail use.
The holder measures 3.9 inches long, 3.9 inches wide, and 7.8 inches high. That height helps it support taller bottles and cups without making the holder feel too bulky. The 5.5 inch front pocket adds real use because you can store small items without opening a saddlebag or backpack.
The soft bag design has one tradeoff. It handles everyday rain and splashes better than plain cloth, but it does not work like a sealed waterproof case. You should remove electronics, paper items, or keys with remotes before riding in heavy rain.
Clamp and Installation
The upgraded alligator clamp fits handlebars and poles from 0.6 to 1.5 inches in diameter. The clamp includes two screws, one gasket, one rubber pad, and internal anti-scratch Velcro. These parts help the holder grip the bar while reducing direct clamp marks.
The hand-screw setup keeps installation simple. You do not need a wrench or screwdriver for normal mounting. That makes the holder useful if you move it from a motorcycle to a boat rail, scooter, stroller, walker, or golf push cart.
Fit still depends on your bar shape and surface. A round bar within the listed range gives you the best result. Oversized, square, heavily tapered, or unusually textured bars can create fit issues even if the clamp feels close to the right size.
Capacity and Drink Fit
The holder supports cups, bottles, cans, and stainless steel bottles up to 32 oz. That capacity gives you room for many large drink bottles that would not fit in a smaller bike cup holder. The adjustable drawstring also helps tighten the opening around different drink shapes.
The 7.8 inch height gives tall bottles more side support during regular riding. It will not turn an open cup into a spill-proof container, but it helps reduce bounce compared with shallow holders. You should still use a closed lid on rough roads, gravel, or trail sections.
The 3.9 inch width fits many travel cups and water bottles. Extra-wide insulated mugs may feel tight or may not sit deep enough. Check your bottle diameter before you buy if you use a wide tumbler every day.
Lining, Cleaning, and Weather Use
The aluminum foil lining makes the inside easier to wipe after spills. It also helps your drink stay cold or hot for a short time. You should not expect cooler-level insulation because the listing describes short-duration temperature help, not long-hour cold retention.
The 600D Oxford fabric is durable and washable for normal outdoor use. Dirt, dust, and light splashes should clean up with simple wiping. Heavy rain can still enter through seams and the top opening, so the holder works best as a drink carrier rather than sealed storage.
The front pocket adds convenience, but it needs the same weather caution. Cards, folded cash, and small tools make sense for dry rides. Phones, paper documents, and remote keys need extra protection in wet conditions.
Performance and Compatibility
Mounting security and drink size decide how well this holder works in real use. The 32 oz capacity, 7.8 inch height, and drawstring opening give it better support for larger bottles than many compact motorcycle drink holders. The clamp range also gives you broad compatibility across handlebars and round rails.
The upgraded alligator clamp, gasket, rubber pad, and dual screws improve grip on compatible bars. You can use it on motorcycles, ATVs, UTVs, scooters, bikes, kayaks, boats, walkers, and similar poles. It works best when the clamp sits flush and the pole stays within the 0.6 to 1.5 inch range.
You should measure your pole before purchase. A bar that is too large will not clamp correctly. A bar that is too small may require extra tightening and may still move under vibration.
How It Performs in Real Use
On a Motorcycle or Scooter
On a motorcycle or scooter, the holder gives you quick drink access without using a backpack pocket or storage box. The 7.8 inch height keeps many bottles seated during normal city and road riding. A capped bottle works better than an open cup because bumps and sudden stops can still spill liquid.
On an ATV or UTV
On an ATV or UTV, the 600D Oxford fabric and 32 oz capacity help during longer outdoor rides. The clamp can handle rougher use when mounted on a compatible round bar. You should tighten it carefully and recheck the clamp after the first ride because off-road vibration can loosen accessories over time.
On a Boat, Kayak, Bike, or Walker
For boats, kayaks, bikes, and walkers, the tool-free clamp makes the holder easy to move between setups. The aluminum foil lining helps when you spill water, soda, or sports drinks inside. The main limit is rain and splash protection, since the holder is not a sealed waterproof container.
Pros and Cons
Pros
- 32 oz capacity fits many large bottles, cans, and travel cups.
- 0.6 to 1.5 inch clamp range works with many handlebars, rails, and poles.
- 600D Oxford fabric gives you a soft, washable, and flexible holder body.
- Aluminum foil lining makes spills easier to wipe and helps with short-term temperature retention.
- 5.5 inch front pocket adds storage for cards, keys, cash, and small ride items.
Cons
- It will not fit bars over 1.5 inches, so oversized handlebars need another mount.
- The fabric design is water resistant, not fully waterproof in heavy rain.
- Extra-wide tumblers may not fit as cleanly as standard bottles and cans.
Is It Worth the Price?
The KEMIMOTO Motorcycle & ATV Cup Holder offers strong value for the price if you need a large soft cup holder with flexible mounting. You get a 32 oz drink capacity, 600D Oxford fabric, aluminum foil lining, and a tool-free alligator clamp. Those details make it more useful than a basic bottle cage for riders who switch between different vehicles or outdoor setups.
It makes the most sense for everyday riders, weekend trail users, boat owners, scooter riders, and walker users who want simple drink access. It may not justify the cost for you if your vehicle already has a built-in cup holder or if you need a fully rigid metal mount. For most compatible bars, it remains a smart buy for everyday use.
How It Compares to Alternatives
If you want a hard metal basket with a swivel-style mount, a LEXIN motorcycle cup holder may suit your setup better. If you want a newer KEMIMOTO metal clamp design with a narrower fit range, the upgraded KEMIMOTO ATV cup holder is another option to compare. The KEMIMOTO 32 oz Oxford fabric holder remains the better pick for you if you want a soft holder, larger cup support, and a small front pocket.
A plastic holder can feel cleaner and more rigid, but it may not handle different bottle shapes as well. A fabric holder like this gives you more flexibility and less rattle. Your best choice depends on your bar diameter, drink size, and how much weather protection you need.
User Experience and Return Policy
Many buyers choose this holder because it solves a simple problem without adding a bulky mount. The 32 oz capacity, 7.8 inch height, and sturdy alligator clamp make it practical for daily rides and outdoor trips. The front pocket also gives you a small storage spot for items you want within reach.
Common fit concerns usually come from oversized bars or unusual mounting surfaces. You can avoid most problems by measuring your bar before ordering. The Amazon return options may apply, but you should check the live listing for the current seller policy and coverage details before purchase.
Frequently Asked Questions
Will it fit on fat handlebars over 1.5 inches diameter?
No. The listed clamp range is 0.6 to 1.5 inches. You should measure your handlebar, rail, or pole before buying because oversized bars will not fit correctly.
Is the cup holder waterproof during heavy rain?
No. The 600D Oxford fabric and aluminum foil lining help with light moisture and cleanup, but the holder is not fully waterproof. Heavy rain can enter through the top opening or seams.
Can the holder rotate or swivel after installation?
The clamp design allows angle adjustment during mounting on compatible bars. Once tightened, it should stay stable during normal use. You should recheck the clamp after rough rides or long vibration-heavy trips.
Does the aluminum lining keep drinks cold for hours?
No. The aluminum foil lining helps keep drinks cold or hot for a short time. It also makes the inside easier to clean after spills.
What size cup or bottle fits best?
The holder is designed for bottles, cans, stainless steel bottles, and large cups up to 32 oz. Standard bottles and narrower travel cups fit best. Very wide tumblers may not sit as securely.
Can you move it between different vehicles?
Yes. The hand-screw clamp makes removal and reinstallation simple. You can move it between a motorcycle, ATV, UTV, scooter, kayak, boat, bike, walker, or similar round-bar setup.
The Bottom Line
The KEMIMOTO Motorcycle & ATV Cup Holder earns an 8.2/10 because it gives you a large 32 oz capacity, durable 600D Oxford fabric, a useful front pocket, and simple tool-free installation. You should buy it if your bar measures 0.6 to 1.5 inches and you want easy drink access on a motorcycle, ATV, boat, scooter, bike, kayak, or walker. You should look elsewhere if you need a fully waterproof holder, a rigid metal basket, or a mount for oversized handlebars.
Ready to Buy?
