Disclosure: As an Amazon Associate, we earn from qualifying purchases. If you click a link on this page and make a purchase, we may receive a small commission at no extra cost to you.
Replacing a worn front wheel bearing or damaged steering knuckle can be expensive, especially when the repair needs special pressing tools. The Detroit Axle Front Steering Knuckles with Wheel Bearing Hubs offer a preassembled replacement pair for select 2008–2012 Honda Accord and 2009–2014 Acura TSX models. You get cast-iron knuckles with wheel bearings and hubs already installed, which can simplify part of the repair. This review explains the fit requirements, construction, installation challenges, and limitations you should check before ordering.
Quick Verdict
Rating: Recommended with caveats
Best For: Honda Accord and Acura TSX owners who need both front knuckle and hub assemblies replaced.
Bottom Line: The preassembled design can save you from pressing new bearings into the knuckles, while the cast-iron construction matches the intended replacement application. However, exact vehicle fit, installation hardware, and safe assembly still need careful checks.
Key Takeaways
- The kit contains two front steering knuckle assemblies, one for the driver side and one for the passenger side.
- Detroit Axle identifies the parts as KA698447 for the driver side and KA698446 for the passenger side.
- Each assembly includes a wheel bearing and hub, reducing the need for a separate bearing press operation.
- The manufacturer specifies cast-iron construction and advertises a limited 10-year warranty.
- Fitment covers listed 2008–2012 Honda Accord and 2009–2014 Acura TSX applications, but you should verify your exact vehicle configuration.
- Professional installation is worth considering because the job involves suspension, steering, brakes, and wheel-speed sensor components.
Product Specifications and Compatibility
The Detroit Axle kit is intended to replace the front steering knuckle and wheel hub assemblies on compatible vehicles. Its main advantage is that the hubs and bearings arrive installed in the knuckles.
| Specification | Detail |
|---|---|
| Brand | Detroit Axle |
| Product | Front steering knuckles with wheel bearings and hubs |
| Manufacturer Part Number | KA698446_KA698447-DA |
| Driver Side | KA698447 |
| Passenger Side | KA698446 |
| Reference Numbers | 698-446 and 698-447 |
| Material | Cast iron |
| Package Quantity | 2 front knuckle, bearing, and hub assemblies |
| Dimensions Listed | 15 × 9 × 9 inches |
| Weight Listings | Amazon lists 20.5 lb item weight; Detroit Axle lists 44 lb for the pair. These figures should not be treated as confirmed individual assembly weights. |
| Honda Compatibility | 2008–2012 Accord, subject to exact fitment |
| Acura Compatibility | 2009–2014 TSX, subject to exact fitment |
| Warranty | Advertised limited 10-year warranty; conditions apply |
| Amazon ASIN | B0CM8MB8NT |
| Best Use | Replacing compatible front knuckle assemblies when the hubs or bearings also need replacement |
Which Vehicles Are Compatible?
Detroit Axle lists several Honda Accord and Acura TSX configurations for this kit. Supported Accord listings include EX, EX-L, LX, LX-P, and LX-S trims for 2008–2012, plus certain later SE and HFP applications.
For the Acura TSX, the manufacturer lists Base models from 2009–2014, V6 models from 2010–2014, and certain A-Spec, Special Edition, Premium, and Tech configurations.
These listings are a starting point rather than a guarantee for every vehicle. Confirm the year, trim, engine, and relevant original part numbers before buying.
Before You Buy: Do not order based on the model year alone. Check the complete vehicle fitment listing, compare the driver-side and passenger-side part numbers, and confirm that your wheel-speed sensor and brake components will work with the replacement assemblies. Ask a qualified parts specialist to confirm fitment using your VIN if anything is unclear.
What Is the Detroit Axle Steering Knuckle Kit?
The Detroit Axle KA698446_KA698447 kit is a pair of replacement front steering knuckle assemblies for selected Honda and Acura vehicles. A steering knuckle connects key steering and suspension parts and provides the mounting structure for the wheel hub and bearing.
Unlike a bare steering knuckle, this package includes the wheel bearing and hub already assembled. That matters when your existing knuckle is damaged or when a bearing repair would otherwise require a hydraulic press.
The pair is designed for owners who need a more complete front-end replacement. However, it is not a full suspension rebuild kit. Parts such as tie-rod ends, control arms, ball joints, sensors, and other service hardware should not be assumed included unless the seller specifically confirms them.
Who Should Buy It?
Best For
- Accord or TSX owners whose vehicles match the listed applications and need both front assemblies.
- Repair shops seeking loaded knuckles that avoid pressing separate bearings into replacement knuckles.
- Owners replacing damaged or worn front knuckles along with their hubs and bearings.
Skip If
- Your vehicle is outside the verified year and fitment range.
- You only need one inexpensive bearing repair and your original knuckle is still serviceable.
- You expect a kit containing every suspension part, sensor, and installation fastener.
Performance, Durability, and Customer Feedback
Cast-Iron Construction
Detroit Axle uses cast iron for these steering knuckles. The material is intended to withstand the loads transferred through the vehicle’s steering and suspension during normal driving.
The manufacturer also states that its steering knuckles undergo impact, wear, and fatigue testing. That is useful evidence of a quality-control process, although it does not establish how long an individual assembly will last on your car.
Since the knuckles are safety-critical parts, a correct fit and proper installation matter at least as much as the material.
Preassembled Wheel Bearings and Hubs
The biggest practical benefit is the preassembled bearing and hub design. A traditional bearing-only repair may involve removing the steering knuckle and using a hydraulic press to extract and install the bearing.
With this Detroit Axle kit, the bearing and hub are already fitted to the replacement knuckle. You still need to remove the existing suspension and brake connections, but the bearing-press operation is generally avoided.
This design can help reduce shop labor for certain repairs. Actual savings depend on the condition of your existing parts and the labor rates in your area.
Customer Feedback and Long-Term Reliability
At the October 2026 editorial check, Amazon displayed a 4.7/5 customer rating for this listing. Ratings can change over time, and they do not guarantee that every buyer will have the same experience.
The advertised 10-year limited warranty also provides a reason to consider the product, but it is not proof of a ten-year service life. Bearing wear, road damage, installation errors, and other operating conditions can affect reliability.
This review is based on published specifications, manufacturer information, and the product listing. It does not claim an independent installation test or long-term road test.
How It Performs in Real Use
The following scenarios explain where this kit may help based on its design. They are practical repair examples, not claims from independent vehicle testing.
Daily Commuting
For a daily-driven Accord or TSX, a properly installed replacement knuckle and hub should restore the intended mounting arrangement when the old components are worn or damaged. It does not automatically fix vibration caused by tires, brakes, or unrelated suspension faults.
Replacing Noisy Wheel Bearings
A worn front wheel bearing can produce noise that changes with road speed or load. When a technician confirms bearing failure, a preassembled knuckle may be convenient because the new bearing and hub come together.
However, if the original knuckle is undamaged, replacing only the bearing may cost less in parts. Compare the full repair cost before choosing.
Repairing Both Front Sides
The two-piece package is useful when both front knuckles require replacement. You receive matching driver-side and passenger-side assemblies in one kit.
When only one side is damaged, a single loaded knuckle may be more economical. Replacing the other side should depend on its condition rather than an assumption that both must always be replaced.
High-Mileage Vehicles
On a high-mileage Accord or TSX, other steering and suspension parts may also be worn. New knuckles and hubs will not correct loose tie-rod ends, damaged control-arm bushings, or failing ball joints.
A complete inspection before installation helps prevent repeat labor and makes it easier to identify the real cause of the problem.
Installation, Warranty, and Purchase Details
What Makes Installation Easier?
Because the hub and wheel bearing are already mounted in each knuckle, you generally do not need to press those parts together yourself. This is the kit’s main installation advantage.
However, removing and fitting the knuckles still involves major front-end components. Depending on the vehicle and repair method, work may involve the brake caliper and rotor, axle nut, wheel-speed sensor, tie-rod connection, and suspension joints.
You may need a floor jack, properly rated jack stands, suitable sockets, a torque wrench, and specialized joint-separation tools. A hydraulic press is normally unnecessary for the supplied preassembled bearing and hub, but other special tools may still be required.
Installation Safety
Follow the factory service instructions for your exact vehicle. Secure the vehicle on suitable supports before working underneath it, and never rely on a hydraulic jack alone.
- Inspect the replacement parts for shipping damage before installation.
- Protect the ABS wheel-speed sensor and its wiring during removal and reassembly.
- Keep grease, dirt, and metal debris away from the bearing’s magnetic encoder area.
- Use the correct vehicle-specific torque values and replace one-time-use fasteners where the service manual requires them.
- Check brake-hose routing and clearance after installation.
- Check the wheel alignment and adjust it if necessary.
The correct torque values depend on the fastener and vehicle configuration. Do not substitute generic torque numbers for the factory specifications.
If you are not experienced with steering, braking, and suspension repairs, have a qualified mechanic handle the installation.
Pro Tip: Before dismantling the front suspension, compare the new driver-side KA698447 and passenger-side KA698446 assemblies with your existing parts. Check the sensor mounting area, brake mounting points, and hub design. Finding a mismatch before installation can prevent wasted labor.
Warranty Coverage and Returns
Detroit Axle advertises a limited 10-year warranty for this product family. Read the current warranty document to understand eligibility, exclusions, claim procedures, and any requirements concerning installation.
Amazon return eligibility can vary by seller, purchase date, and item condition. Check the return information displayed with your specific order instead of assuming that every purchase has the same return terms.
The Amazon listing dates this product’s first availability to November 1, 2023. That is listing history, not the manufacturing date of an individual part.
Common Mistakes to Avoid
Avoiding a few common errors can make this repair easier and safer.
- Buying by year alone: Confirm the exact vehicle application and both part numbers.
- Assuming all hardware is included: Plan for any required axle nuts, cotter pins, bolts, or other fasteners.
- Replacing parts without diagnosis: Verify whether the fault is a bearing, knuckle, tie rod, brake, or another component.
- Ignoring the ABS system: Ensure the wheel-speed sensor and bearing encoder setup are compatible and undamaged.
- Skipping alignment checks: Replacing steering or suspension components may affect alignment.
- Adding grease to a sealed bearing: Do not open or modify the preassembled bearing unless the manufacturer specifically instructs you to do so.
Pros and Cons
Pros
- Includes both front steering knuckles with wheel bearings and hubs.
- Preassembled design avoids a separate bearing-press operation in a typical complete-knuckle replacement.
- Manufacturer-confirmed cast-iron construction.
- Specific driver-side and passenger-side part numbers make identification easier.
- Advertised limited 10-year manufacturer warranty.
Cons
- Fitment is limited to listed Accord and TSX applications.
- Installation still involves safety-critical steering and suspension work.
- May cost more in parts than a bearing-only repair when the existing knuckles are undamaged.
Is It Worth the Price?
The Detroit Axle kit is worth considering when you need a complete replacement for both front knuckles and their wheel hubs. Its value comes mainly from combining several components into ready-assembled units, not from a guaranteed improvement in handling.
Compared with a bearing-only repair, this is a more complete replacement approach. You may save on bearing-press labor, but you are also buying two knuckles and hubs. The total repair cost depends on the available parts, local labor rates, and whether both sides actually need replacement.
For a vehicle with a damaged knuckle or multiple worn front-end components, the kit can offer practical value. If the only problem is one worn bearing and the original knuckle remains in good condition, a smaller repair may be a better use of your budget.
How It Compares to Alternatives
Detroit Axle also sells bare front steering knuckle pairs, including the KB698046 and KB698047 family for supported Accord applications. Those are worth comparing when you already have serviceable hubs and bearings or intend to assemble the parts separately.
A bearing-only repair keeps your existing knuckle but normally requires bearing removal and installation tools. A single loaded knuckle can make more sense when only one side needs work. The reviewed Detroit Axle pair is most appealing when both front assemblies need replacement and you want the hub and bearing work completed before installation.
Frequently Asked Questions
Are These Steering Knuckles Compatible With All Trim Levels?
Not automatically. Detroit Axle lists multiple 2008–2012 Honda Accord and 2009–2014 Acura TSX configurations, but you should confirm your specific trim, year, and part numbers. Use a VIN-based parts check when the listing is unclear.
Do They Include ABS Sensor Rings or Wiring?
The confirmed package includes two steering knuckles with wheel bearings and hubs. Separate ABS sensors and wiring are not listed as included components. The wheel bearing encoder is a separate compatibility concern, so confirm the correct sensor arrangement before installation.
Are the Hubs Balanced for Vibration-Free Driving?
The manufacturer states that the assemblies undergo impact, wear, and fatigue testing, but that does not guarantee vibration-free driving. Tire imbalance, brake problems, damaged wheels, and other suspension faults can still cause vibration. Proper diagnosis and installation are essential.
Can I Return Only One Knuckle if Needed?
A partial return is not guaranteed for a two-piece kit. Contact the seller or Amazon support to confirm whether one assembly can be returned separately. The applicable return policy depends on the purchase and seller terms.
Do They Require Re-Greasing Before Installation?
The bearings arrive preassembled in the knuckles. Do not open, grease, or alter sealed bearings without specific manufacturer instructions. Inspect the assemblies for visible damage and follow the installation guidance.
Is a Hydraulic Press Required for Installation?
Normally, no press is needed to install the supplied hub and bearing because they are already assembled in the knuckle. You still need the correct tools to remove and replace the steering and suspension connections. Some installations require specialized joint-separation tools.
Will This Kit Fix Wheel Noise and Steering Vibration?
It may address symptoms caused by a failed wheel bearing or damaged knuckle, provided the fault has been correctly diagnosed. It will not repair unrelated problems with tires, brakes, tie rods, or other suspension components. Have the source of the noise or vibration confirmed before replacing parts.
Is Wheel Alignment Required After Replacing the Knuckles?
The factory service guidance calls for checking alignment after knuckle replacement and adjusting it if necessary. The repair also requires proper tightening of steering and suspension fasteners. Have the completed installation inspected before returning the vehicle to normal use.
The Bottom Line
The Detroit Axle Front Steering Knuckle and Wheel Hub Bearing Pair is recommended with caveats for compatible Accord and TSX owners who need both front assemblies replaced and want to avoid a separate bearing-press operation. Its cast-iron design, preassembled hubs, and limited 10-year warranty are useful strengths, but careful fitment checks and professional-quality installation remain essential. Skip the complete pair if only a smaller bearing repair is needed or your vehicle does not match the supported applications.
Ready to Buy?
Confirm your vehicle fitment, included parts, warranty terms, and current Amazon price before ordering.
