Disclosure: As an Amazon Associate, we earn from qualifying purchases. If you click a link on this page and make a purchase, we may receive a small commission at no extra cost to you.
Choosing the wrong cartridge oil filter can create a bigger problem than simply wasting a few dollars, especially on GM engines that were built with more than one filter-housing design. The ACDelco GM Original Equipment PF2263G is a vehicle-specific cartridge filter made for applications that use the correct UFI oil-filter housing. Its biggest advantage is GM OE fit and a supplied O-ring, but you still need to confirm the housing before ordering. This review explains the verified dimensions, fitment issue, installation considerations, real-world use, and alternatives so you can decide if PF2263G is the right filter for your vehicle.
Quick Verdict
Rating: 8.5/10, Recommended with caveats
Best For: Owners of compatible GM vehicles with the correct UFI oil-filter housing who want an OE-spec replacement cartridge.
Bottom Line: The PF2263G is a strong choice when your vehicle specifically calls for this GM OE cartridge. The main limitation is critical: visually similar Hengst-equipped applications use a different filter, so you should verify the housing instead of buying by vehicle name alone.
| Specification | Detail |
|---|---|
| Brand | ACDelco |
| Model | PF2263G |
| GM Part Number | 25195785 |
| Product Type | Engine oil filter cartridge with cap seal O-ring |
| Fit Type | Vehicle-specific |
| Required Housing | Use with the correct UFI-marked filter cap/housing |
| Height | 4.61 in / 117 mm |
| Outside Diameter | 2.2 in / 56 mm at top and bottom |
| O-Ring Outside Diameter | 2.74 in / 69.6 mm |
| Gasket Type | O-ring |
| Classification | GM Original Equipment |
| Warranty | 24-month/unlimited-mile limited parts warranty, subject to GM warranty terms |
Key Takeaways
- PF2263G is an ACDelco GM Original Equipment cartridge filter identified by GM part number 25195785.
- The filter is specifically associated with the UFI oil-filter housing and should not be treated as interchangeable with cartridges used in the Hengst housing.
- Verified dimensions include a 4.61-inch height and 2.2-inch outside diameter.
- An O-ring cap seal is part of the filter assembly, helping you renew the sealing component during an oil change.
- Fitment matters more than broad make-and-model assumptions, so checking the cap or housing identification is an important step before ordering.
- Replacement timing and cap torque should follow the maintenance information for your exact vehicle rather than a universal mileage or torque figure.
Before You Buy: Check the oil-filter cap or housing before ordering. GM used different cartridge systems on some similar engines and model years. PF2263G is for the applicable UFI system and should not be substituted for the PF2257G used with a Hengst housing.
What Is the ACDelco PF2263G?
The ACDelco PF2263G is a replaceable engine-oil filter cartridge supplied under GM Original Equipment branding. Unlike a conventional spin-on filter with its own metal can, this design fits inside the vehicle’s existing filter housing and is serviced by removing the housing cap.
Its job is straightforward but important: it helps keep abrasive contaminants and debris from circulating with the engine oil. GM lists the part as vehicle-specific rather than universal, which means the correct housing and engine application must be confirmed before installation.
The PF2263G also comes with the cap-seal O-ring used in the applicable assembly. Replacing that seal during service is useful because an old, damaged, twisted, or incorrectly installed O-ring can contribute to leakage around the cap.
Who Should Buy It?
Best For
- Owners whose service information specifically calls for ACDelco PF2263G or GM part 25195785.
- Compatible GM vehicles equipped with the applicable UFI oil-filter housing.
- DIY owners or technicians who prefer a GM OE replacement instead of choosing by dimensions alone.
Skip If
- Your oil-filter housing is marked Hengst and requires PF2257G or another specified cartridge.
- Your owner’s manual or parts catalog specifies a different oil-filter part number.
- You are trying to choose a filter based only on vehicle make without checking engine and housing details.
Fit and Compatibility
Compatibility is the most important buying factor for this filter. GM’s parts information identifies PF2263G as a specific-fit cartridge and lists applications that include selected Chevrolet and Buick vehicles. Examples shown in current GM catalogs include certain Chevrolet Cruze, Cruze Limited, Sonic, Trax, and Malibu applications, plus certain Buick Encore and Cascada applications.
That does not mean every example of those models uses PF2263G. Engine, model year, and the installed filter-housing supplier can change the required cartridge. GM service information specifically distinguishes the UFI and Hengst systems and states that their corresponding filters are not interchangeable.
How to Check Before Ordering
Start with the filter part number listed for your exact VIN, engine, and model year. When applicable, inspect the oil-filter cap for the supplier marking. GM service information describes the UFI cap as a different design from the Hengst cap, making this physical check useful when two cartridges are listed for a similar application.
Pro Tip: Before draining the oil, compare the replacement cartridge and O-ring with the parts coming out of your housing. If the shape, sealing arrangement, or housing identification does not match, stop and verify the part number instead of forcing the new filter into place.
Materials and Build
The useful quality point here is not flashy construction. It is that PF2263G is sold as an ACDelco GM Original Equipment service part that GM says is designed, engineered, tested, and validated for the intended applications. That gives you a known dimensional and fit reference when your vehicle calls for this exact part.
The cartridge measures about 4.61 inches tall with a 2.2-inch outside diameter at the top and bottom. The associated O-ring has a listed outside diameter of 2.74 inches. These dimensions also make clear why you should not assume that two similar-looking cartridges are interchangeable.
Installation and Safety
Installation is typical for a cartridge-style filter, but the exact procedure depends on your engine. Work with the engine safely shut down, follow the vehicle’s oil-change procedure, remove the filter-housing cap, replace the cartridge, and install the supplied O-ring in the correct groove.
A light film of clean engine oil on the new O-ring can help it seat without twisting during assembly. Do not reuse a damaged seal, and do not assume a universal cap torque. Tighten the filter housing according to the specification in the service information for your exact vehicle and engine.
After refilling with the manufacturer-specified oil, start the engine as directed by the vehicle procedure and inspect the filter-cap area for leaks. Recheck the oil level according to the owner’s manual before normal driving.
Filtration and Engine Protection
An engine oil filter protects lubrication passages and moving parts by capturing contaminants before they continue circulating through the engine. GM specifically describes its OE filters as helping keep abrasive particles away from bearings and other engine hydraulic components while maintaining the clean oil supply needed by the lubrication system.
For you, the practical benefit of PF2263G is not an unverified claim about extraordinary filtration percentages or unusually long drain intervals. Its value comes from using the cartridge GM specifies for the correct housing. Proper dimensions, sealing, and fit are basic requirements for reliable oil filtration.
The filter can be used as part of a normal service routine with the oil type approved for your vehicle. A major parts retailer also lists PF2263G as suitable for different motor-oil types, but your engine’s required oil specification should still come from the vehicle manufacturer.
How It Performs in Real Use
Daily Commuting
For normal commuting, PF2263G provides a straightforward OE replacement when it matches your housing. Stop-and-go driving can place frequent demands on the lubrication system, so using the correct cartridge and following the vehicle’s oil-life schedule matter more than chasing an arbitrary extended interval.
Highway Driving
Long highway trips keep the engine operating for extended periods. The filter’s role remains the same: keep contaminants from circulating while allowing the lubrication system to work as designed. A correctly fitted cartridge and fresh sealing O-ring reduce the chance of introducing a fit-related problem during service.
DIY Oil Changes
The cartridge format can be convenient for owners who already perform their own maintenance because you replace the internal element instead of a full metal canister. The main extra step is making sure the O-ring is positioned correctly and that you use the correct cap-tightening specification.
Long-Term Ownership
PF2263G makes the most sense when you want to stay with an OE-design service part throughout ownership. Consistent use of the correct filter, correct engine oil, proper oil level, and the maintenance schedule specified for the vehicle is more important than stretching the filter to a fixed mileage target.
Maintenance and Common Mistakes
Replace the filter whenever the vehicle’s maintenance schedule calls for an engine-oil and filter service. Do not rely on a universal 5,000-mile or 7,500-mile rule because service intervals can vary with model year, engine, oil-life monitoring, operating conditions, and manufacturer guidance.
A common mistake is ordering PF2263G simply because it appears in a search for a Cruze, Sonic, Trax, or Encore. Some related applications use another housing and cartridge. Another mistake is reusing the old O-ring or placing the new seal in the wrong groove on the filter cap.
Finally, avoid overtightening the housing cap. A published torque for another engine or housing should not be treated as the specification for yours. Use the owner’s manual or appropriate service information for the exact vehicle.
Pros and Cons
Pros
- GM Original Equipment replacement with verified part number 25195785.
- Vehicle-specific cartridge dimensions for the intended UFI housing.
- Includes the cap-seal O-ring needed during routine filter replacement.
- Backed by GM’s stated 24-month/unlimited-mile limited parts warranty.
- Widely cross-referenced, making equivalent filters easier to identify if needed.
Cons
- Not interchangeable with the filter used in the similar Hengst housing.
- Vehicle name alone may not be enough to confirm fitment.
- Installation still requires the correct vehicle-specific cap torque and oil-service procedure.
Is It Worth the Price?
The PF2263G is best judged as an OE replacement rather than as a filter that promises unusual performance features. You are paying for a known ACDelco/GM part number, specific dimensions, the correct cartridge configuration for its intended housing, and GM warranty support.
That makes it worth considering when your vehicle specifically calls for PF2263G and you prefer an OE-branded replacement. Buyers focused mainly on minimizing cost can find cross-referenced aftermarket cartridges, but price should not take priority over matching the correct UFI filter design.
How It Compares to Alternatives
The FRAM CH12246, WIX WL10283, and Purolator L29177 are among the filters cross-referenced to PF2263G by filter catalogs. They can be worth comparing when you prefer a different brand or local availability is better.
Do not treat ACDelco PF2257G as a simple substitute. GM documentation identifies PF2257G with the Hengst system and PF2263G with the UFI system and specifically warns that the two filter designs are not interchangeable. The PF2263G makes the most sense when your priority is staying with the GM OE part specified for the UFI application.
Frequently Asked Questions
How do I know if ACDelco PF2263G fits my vehicle?
Confirm PF2263G or GM part 25195785 in the parts information for your exact vehicle, engine, and model year. Also check the filter housing when applicable because PF2263G is associated with the UFI system, while similar GM applications may use a different cartridge.
Are PF2263G and PF2257G interchangeable?
No. GM service information distinguishes the PF2263G used with the UFI system from the PF2257G used with the Hengst system and states that the two are not interchangeable. Verify the housing before installation.
Does the PF2263G come with an O-ring?
Yes. GM describes the product as an engine oil filter and cap seal O-ring. Use the new seal during service and make sure it is installed in the correct location on the cap.
Can I use PF2263G with synthetic motor oil?
PF2263G is sold for normal engine-oil filtration and major retailers list it for use with different motor-oil types. The important requirement is to use the oil viscosity and specification approved for your particular engine.
How often should I replace the PF2263G?
Replace the oil filter according to the oil-change and maintenance schedule for your exact vehicle. Do not assume one fixed mileage interval applies to every PF2263G application because maintenance requirements and oil-life systems can differ.
What are the verified dimensions of PF2263G?
GM lists the cartridge at 4.61 inches (117 mm) high with a 2.2-inch (56 mm) outside diameter at both ends. The listed O-ring outside diameter is 2.74 inches (69.6 mm).
What torque should I use on the oil-filter cap?
Use the cap-tightening specification provided for your exact engine and filter housing. A universal torque value should not be assumed because PF2263G is used across more than one vehicle application.
What warranty does ACDelco provide for PF2263G?
GM’s current parts listing states a 24-month/unlimited-mile limited warranty for parts, with additional terms applying to labor when installed by a GM dealer. Review the current GM warranty terms for eligibility and exclusions.
The Bottom Line
The ACDelco PF2263G is an easy recommendation when your vehicle specifically requires GM part 25195785 and uses the correct UFI filter housing. You get a GM OE cartridge, verified dimensions, a replacement O-ring, and a defined warranty, but buyers with a Hengst housing or a different specified part number should skip it.
The main buying lesson is simple: verify the housing and part number first. Once fitment is confirmed, PF2263G is a practical OE choice for routine engine-oil service.
