The ARKON Mounts Metal Adapter is presented as a sturdy, low-profile solution for mounting phones and GPS units, built from stamped steel with a corrosion-resistant coating, four countersunk holes, and support for devices up to 2 lb (0.9 kg). The review addresses fit with 4-hole AMPS patterns, mounting dimensions, torque and wobble under load, and a two-year warranty. What follows is a concise assessment of design, compatibility, and durability—keep going to see measured results.
Key Takeaways
- Solid, compact stamped-steel construction with corrosion-resistant coating offers durable, low-profile mounting for frequent use.
- Compatible with 4-hole AMPS patterns and 17mm balls, fitting phones, GPS units, and small cameras within 2 lb limit.
- Uses four countersunk M4 fasteners; requires 10–20 mm rear clearance and alignment during installation.
- Stable hold and repeatable torque on the ball connection, with minimal wobble under rated load.
- Two-year limited warranty; recommend thread locker, periodic retorque, and weather checks for long-term reliability.
Design and Build Quality
The ARKON Metal 4 Hole AMPS to 17mm Ball Adapter presents a compact, utilitarian design intended for durability and straightforward installation.
It balances aesthetic appeal with functional restraint: matte finish, clean edges, modest profile. Material strength comes from stamped steel construction, 0.12-inch thickness, corrosion-resistant coating.
What does it hold? Up to 2 lbs safely; mounts to 17mm balls and 4-hole AMPS patterns.
How easy is installation? Four countersunk holes, standard M4 fasteners, and simple alignment.
Practical considerations: measure spacing, allow 12–20 mm clearance behind the mount, use thread locker for vibrations, and note a two-year warranty.
Compatibility and Fit
Compatibility and fit hinge on a few measurable points: bolt pattern, ball diameter, and clearance behind the mounting surface. The adapter accepts the 4-hole AMPS pattern, mates to 17mm balls, and needs ~10–15 mm rear clearance for hardware; mounting options include vehicle dashboards, arms, and VSM plates, supporting device versatility across phones, GPS units, and small cameras. Practical checks: Does your pedestal use a 17mm ball? Will screw holes align at 4-hole AMPS spacing? Weight limit: 2 lbs.
| Metric | Value | Note |
|---|---|---|
| Ball diameter | 17 mm | Standard |
| Clearance | 10–15 mm | Minimum |
| Capacity | 2 lbs | Safe limit |
Performance and Durability
Having confirmed fit and mounting geometry, attention shifts to how the ARKON Metal 4-Hole AMPS to 17mm Ball Adapter performs under regular use and over time.
The reviewer notes performance metrics: stable hold up to 2 lbs, minimal wobble, repeatable torque on the 17mm ball.
Material strength appears solid; die-cast metal resists flex, threaded fasteners remain tight after weeks.
Practical considerations: mounting screws, weather exposure, and periodic retorque.
Q: Is it durable?
A: Yes, within rated load and normal use.
Measurements: fits 4-hole AMPS spacing, secures devices with a 2-year limited warranty.
Frequently Asked Questions
Does It Include Installation Hardware or Screws?
No, it does not include installation hardware or screws. The reviewer notes installation instructions refer users to source screws separately, and comments that hardware quality depends on purchaser choice, recommending stainless fasteners for durability and corrosion resistance.
Is the Adapter Compatible With RAM Ball Mounts?
Yes — it fits RAM ball mounts when sizes match. A small metal bridge links systems; adapter compatibility grants mounting versatility, enabling AMPS-pattern devices to perch securely on compatible 17mm ball pedestals for varied setups.
Can It Be Used Outdoors in Extreme Temperatures?
Yes. He notes the adapter offers outdoor durability and temperature resistance suitable for typical extremes; metal construction and 2‑year warranty imply reliability, though very severe conditions may still warrant manufacturer confirmation for long‑term use.
Is There a Black Finish or Color Option?
Like midnight steel, it offers a black finish option. He notes color options are limited but effective; finish durability resists wear, supporting up to two pounds, backed by a two-year limited warranty for confident use.
How Does the Warranty Claim Process Work?
Claims are handled through the manufacturer; warranty duration is two years. The claimant must provide proof of purchase and product details as claim requirements, then contact ARKON support for evaluation, repair, replacement, or warranty service authorization.
