If you need to replace the key fob battery in a 2013 Ford Edge, the most important detail is the battery size. Ford’s owner’s information specifies one CR2032 3V lithium coin battery for the 2013 Edge remote. This guide focuses specifically on the key fob battery, not the vehicle’s 12-volt starting battery.
Before ordering, open your remote or check the battery already installed and confirm that it is marked CR2032. Key-fob housings and seller fitment guides can vary, so matching the battery code is safer than relying only on a broad vehicle compatibility list.
Affiliate disclosure: This page contains Amazon affiliate links. If you buy through a qualifying link, we may earn a commission at no additional cost to you.
Quick Verdict
For a 2013 Ford Edge key fob that uses a CR2032 battery, a two-pack gives you one replacement plus a spare. The option below uses the correct CR2032 battery size. Confirm the battery marking and compare your exact remote style with the seller’s fitment information before purchasing.
| Key Fob Replacement Batteries for Ford (CR2032, Pack of 2) |  |
CR2032 Two-Pack | Battery Size: CR2032 | Quantity: 2 Batteries | Use: Ford Key Fob | CHECK PRODUCT DETAILS | Read Our Analysis |
More Details on Our Recommended Pick
-
Key Fob Replacement Batteries for Ford (CR2032, Pack of 2)
If your 2013 Ford Edge remote uses a CR2032 battery, this two-pack is a convenient replacement option. The battery size matches the CR2032 specification used by the 2013 Edge remote, and having two cells gives you a spare for a future replacement.
The biggest reason to choose this option is simplicity: you are buying the correct 3V CR2032 coin-cell format rather than relying on a generic Ford battery description. Replacing the coin cell normally does not erase the remote from the vehicle, so routine battery replacement should not require key-fob programming.
Who should buy it: 2013 Ford Edge owners who have checked their existing remote and confirmed that it uses a CR2032 battery.
Who should avoid it: Anyone whose existing remote contains a different battery code or whose exact remote housing does not match the seller’s fitment information. Always verify the battery inside your fob before ordering.
- Type:Lithium Coin Battery
- Battery Size:CR2032
- Voltage:3V
- Quantity:2 Batteries
- Compatibility:2013 Ford Edge remotes that use CR2032; verify your exact fob
- Installation:DIY battery replacement following the owner’s manual
- Programming:Routine battery replacement should not erase transmitter programming
- Best For:Keeping one replacement and one spare
- Before Buying:Confirm CR2032 is printed on your existing battery
Before You Buy a 2013 Ford Edge Key Fob Battery
A key-fob battery is inexpensive and simple to replace, but choosing the wrong coin-cell size can prevent the remote from working correctly. Use the checks below before purchasing.
Confirm the CR2032 Battery Code
The 2013 Ford Edge remote uses a CR2032 3V lithium coin battery. The safest check is to remove the existing battery and read the code printed on its face. It should say CR2032 or an equivalent specified for the remote.
Do not choose a battery simply because a marketplace title mentions Ford, Edge, or a broad range of model years. Compatibility lists can cover several generations of remotes that use different battery sizes.
Check Your Key Fob Style
The 2013 Edge could be equipped with different remote styles. Before ordering, compare your key or intelligent-access remote with the seller’s fitment images and instructions. The battery code is more important than the general vehicle list.
If the seller’s listing specifically excludes your remote style, use a CR2032 product that clearly supports your exact housing instead of assuming the accessory kit will fit.
Decide Whether You Want a Single Battery or Two-Pack
Your remote needs only one battery at a time. A two-pack can still be useful because you can install one and keep the second as a spare. Store the unused battery in its original packaging, away from children and metal objects.
Follow the Correct Installation and Polarity
Open the remote carefully so you do not damage the housing or internal contacts. Depending on your remote style, the cover is released differently. Pay attention to the position of the old battery before removing it and install the replacement in the orientation specified for your remote.
For intelligent-access remotes, Ford’s instructions specify installing the replacement with the positive (+) side facing downward. Follow the procedure for your exact remote rather than forcing the cover or battery into place.
Routine Battery Replacement Should Not Require Reprogramming
Changing the coin-cell battery does not normally delete the transmitter from the vehicle. After installing the new battery and closing the housing, test the lock, unlock, liftgate, panic, and remote-start functions that apply to your vehicle.
If the remote still does not work, reopen it and check battery orientation and contact placement before assuming the key requires programming.
Battery Safety and Disposal
CR2032 coin cells are small enough to be swallowed and can cause serious injury. Keep new and used batteries away from children and pets. Do not leave loose coin batteries on counters, in cup holders, or mixed with coins and keys.
Dispose of the old battery according to local battery-recycling rules. Many electronics, automotive, and recycling locations accept used lithium coin cells.
How to Replace the 2013 Ford Edge Key Fob Battery
The exact opening procedure depends on the remote fitted to your Edge. Work on a clean surface so small pieces cannot fall away.
Integrated Keyhead Transmitter
Use a thin coin at the slot near the key ring to carefully release the battery cover. If your transmitter has a rubber gasket, lift it carefully without damaging it. Remove the old battery, install the new CR2032 in the same correct orientation, replace the gasket if fitted, and snap the cover back into place.
Intelligent Access Remote
Remove the backup key first. Use a thin coin at the release area behind the backup-key location to open the battery cover. Remove the old battery and install one CR2032 with the positive side facing downward. Then snap the cover closed and reinstall the backup key.
Test the Remote
Stand near the vehicle and test the buttons after replacement. If the operating range is still poor, make sure the new battery is seated firmly and that the contacts are clean and undamaged.
Frequently Asked Questions
What Battery Does a 2013 Ford Edge Key Fob Use?
The 2013 Ford Edge remote uses one CR2032 3V lithium coin battery. Confirm the marking on your existing battery before ordering because marketplace compatibility descriptions can sometimes combine different model years and remote generations.
Does the 2013 Ford Edge Key Fob Use One or Two Batteries?
It uses one CR2032 battery in the remote. Buying a two-pack simply gives you an extra battery for a future replacement.
Do I Have to Reprogram the Key Fob After Changing the Battery?
Normally, no. Replacing the battery should not delete the transmitter from the vehicle. If the remote does not work afterward, first verify that the CR2032 is installed correctly and making good contact.
How Do I Know My Key Fob Battery Is Getting Weak?
Common signs include reduced remote range, inconsistent locking or unlocking, or needing to press a button more than once. If the battery is several years old and the remote has become unreliable, replacing the CR2032 is a sensible first troubleshooting step.
Can I Replace the Key Fob Battery Myself?
Yes. Battery replacement is a straightforward DIY job when the correct opening procedure is followed. Use a thin coin or suitable non-damaging tool, avoid scratching the circuit board, and do not force the housing apart.
Is This the Same as the Car’s Starting Battery?
No. The CR2032 discussed here powers the key fob only. The large 12-volt battery under the hood is a completely different automotive battery and requires vehicle-specific fitment verification before purchase.
Final Recommendation
For a 2013 Ford Edge key fob battery, focus on the battery code rather than broad marketplace fitment claims. Ford specifies a CR2032 3V lithium coin cell, so confirm CR2032 on your existing battery before purchasing.
The retained two-pack is a practical choice when your remote uses CR2032 because it provides one replacement and one spare. Verify your exact fob style, install the battery in the correct orientation, and test the remote afterward. Routine battery replacement should not require transmitter reprogramming.
