If you drive a 2019 Ford Fusion Hybrid, the first thing to know is that tire size depends on trim. The Hybrid SE, Hybrid SEL, and Hybrid Titanium were not all equipped with the same tire size, so choosing a tire only because it says “Ford Fusion” can lead to a costly fitment mistake.
This guide focuses only on the supplied products that remain useful for a 2019 Fusion Hybrid after fitment review: a 235/45R18 Goodyear tire for vehicles that specify that size and a 17-inch replacement wheel for compatible 2019–2020 Fusion applications. Always confirm the tire-size label on the driver’s door jamb and, when buying a wheel, match the wheel dimensions and OE part information before ordering.
Affiliate disclosure: This article is reader-supported. When you purchase through qualifying Amazon links, we may earn a referral commission at no extra cost to you.
Quick Verdict
For a 2019 Fusion Hybrid using 235/45R18 tires: The Goodyear Eagle Touring is the relevant tire from the supplied product list. This size is associated with the 18-inch Hybrid Titanium configuration, but you should still confirm the size printed on your vehicle’s tire placard.
For a compatible 17-inch wheel replacement: The 17×7.5-inch silver wheel is the relevant wheel option supplied for 2019–2020 Fusion applications. Confirm the 5×108 bolt pattern, 55 mm offset, 63.4 mm hub bore, and OE references before buying.
Important: No supplied tire in this article correctly covers the factory 17-inch tire sizes used by all 2019 Fusion Hybrid SE or SEL configurations, so this guide does not recommend forcing an incorrect tire size onto those vehicles.
Quick Comparison
| Product | Product Type | Best For | Key Fitment Check |
|---|---|---|---|
| Goodyear Eagle Touring 235/45R18 98V | All-season tire | 2019 Fusion Hybrid using 235/45R18 | Confirm 235/45R18 on the vehicle placard |
| 17″ Premium Aluminum Alloy Wheel Rim | Replacement wheel | Compatible 2019–2020 Fusion 17-inch applications | 17×7.5, 5×108, 55 mm offset, 63.4 mm hub bore |
Goodyear Eagle Touring All Season 235/45R18 98V Tire
If your 2019 Ford Fusion Hybrid specifies 235/45R18 tires, the Goodyear Eagle Touring is the strongest direct tire match from the supplied products. Its touring-focused design is intended to balance everyday handling, all-season traction, and lower road noise rather than chase aggressive summer-tire performance.
The 235/45R18 version carries a 98V service description and XL load range. Published specifications for this size include an approximately 26.3-inch overall diameter, 10/32-inch original tread depth, a maximum load of 1,653 pounds per tire, and an approved rim-width range of 7.5 to 9.0 inches.
Best For: Drivers whose 2019 Fusion Hybrid tire placard specifically calls for 235/45R18 and who want an all-season touring tire for normal commuting, highway driving, and everyday wet or dry conditions.
Why You’ll Like It: It gives you a known-brand all-season option in the correct supplied 18-inch size without forcing a non-factory diameter onto a vehicle already equipped for 235/45R18 tires.
Who Should Avoid It: Owners whose door-jamb label specifies a 17-inch tire size, and drivers who routinely need dedicated winter-tire performance for severe snow or ice.
Pros:
- 235/45R18 sizing makes it relevant to 2019 Fusion Hybrid configurations that specify this factory-size tire.
- Optimized contact area and biting-edge tread features are designed for responsive everyday handling and all-season traction.
- Touring-oriented tread design prioritizes a quieter, more comfortable road experience than an aggressive performance tire.
- 98V XL specification provides a clearly defined service rating for comparison with the vehicle’s requirements.
Cons:
- It is not the correct direct-size replacement for 2019 Fusion Hybrid models using 17-inch wheels.
- It is an all-season touring tire, not a substitute for a dedicated winter tire in severe winter conditions.
- Ride quality and noise still depend on inflation, alignment, road surface, suspension condition, and tire wear.
17″ Premium Aluminum Alloy Wheel Rim for Ford Fusion (2019-2020)
If you are replacing a damaged 17-inch wheel rather than buying a tire, this aluminum wheel is the relevant wheel option from the supplied list for 2019–2020 Ford Fusion applications. It is designed around factory-style dimensions, but you should compare its specifications with the wheel already on your vehicle before ordering.
The wheel is listed as 17×7.5 inches with a 5×108 mm bolt pattern, 55 mm offset, and 63.4 mm hub bore. The associated Ford OE references are KS7Z1007F and KS7C1007A1A. Center cap, lug nuts, and TPMS sensor are not included, so plan to reuse compatible components or purchase them separately if required.
Best For: Owners replacing a damaged or worn 17-inch wheel on a compatible 2019–2020 Fusion where the existing wheel specifications or OE number match.
Why You’ll Like It: Factory-style dimensions make comparison easier than with a generic aftermarket wheel, reducing guesswork when you are trying to replace one damaged wheel.
Who Should Avoid It: Drivers with an 18-inch wheel setup, anyone whose existing wheel uses different dimensions, or buyers who have not yet verified their exact wheel specification.
Pros:
- 17×7.5-inch configuration with a 5×108 mm bolt pattern, 55 mm offset, and 63.4 mm hub bore.
- Associated with Ford OE references KS7Z1007F and KS7C1007A1A for easier fitment comparison.
- Aluminum construction with a factory-style silver finish suits buyers seeking a replacement-style appearance.
- Useful for replacing a single damaged wheel without automatically changing the entire set.
Cons:
- This is a wheel only; a tire must be purchased and mounted separately.
- Center cap, lug nuts, and TPMS sensor are not included.
- A matching bolt pattern alone does not guarantee correct fitment; offset, hub bore, diameter, width, brake clearance, and OE application also matter.
Factors to Consider When Choosing Tires and Wheels for a 2019 Ford Fusion Hybrid
Verify Your Factory Tire Size First
The 2019 Ford Fusion Hybrid was offered with more than one tire size. Factory specifications vary by trim, including P225/50R17 for the Hybrid SE, 235/50R17 for the Hybrid SEL, and 235/45R18 for the Hybrid Titanium. Do not choose a tire simply because another 2019 Fusion owner uses it.
The safest starting point is the tire-and-loading-information label on the driver’s door jamb. Match the tire size there unless you are intentionally changing wheel size with professionally verified fitment.
Do Not Confuse Tire Fitment With Wheel Fitment
A tire size such as 235/45R18 describes the tire. Wheel compatibility involves additional measurements such as wheel diameter, width, bolt pattern, offset, hub bore, brake clearance, and load capability. A wheel can share the correct bolt pattern and still be an unsuitable replacement if another critical measurement is wrong.
Check Load Index and Speed Rating
Your replacement tire should meet the requirements specified for your vehicle. Do not downgrade the required load-carrying capability simply because a tire has the correct width, aspect ratio, and rim diameter. The complete service description matters.
If you are unsure which load index or speed rating is appropriate for your exact configuration, compare the existing tire and vehicle placard or ask a qualified tire installer before ordering.
Fuel Economy and Tire Pressure
A hybrid’s efficiency can be affected by tire rolling resistance, tire construction, wheel and tire weight, alignment, and inflation pressure. Underinflated tires generally create more rolling resistance and can also lead to uneven wear and less predictable handling.
Use the cold tire pressure specified on the vehicle placard. Do not inflate a tire simply to the maximum PSI molded on its sidewall, because that number is not the vehicle’s normal recommended inflation pressure.
All-Season vs. Seasonal Tires
All-season tires are convenient for drivers who encounter a mix of dry roads, rain, and moderate seasonal changes. They are designed to balance tread life, road manners, and year-round usability.
If you regularly drive in substantial snow, ice, or prolonged freezing temperatures, a dedicated winter tire can provide more appropriate cold-weather traction. Drivers in consistently warm climates may instead prioritize heat resistance, wet braking, and dry handling.
Tread Life and Maintenance
Tread life varies with tire design, alignment, inflation, rotation schedule, road conditions, climate, and driving style. A higher treadwear rating can be useful when comparing similar tires, but it should not be treated as a guaranteed mileage figure.
Rotate tires according to the vehicle and tire manufacturer’s guidance, check pressure regularly when the tires are cold, and correct alignment problems if you notice uneven wear.
Wet and Snow Traction
For wet roads, look for tread features designed to move water away from the contact patch and maintain predictable grip. For snow, additional biting edges and cold-weather compound performance become increasingly important.
An all-season label does not mean a tire performs like a dedicated winter tire on heavy snow or ice, so choose based on the worst conditions you expect to encounter regularly.
Ride Comfort and Noise
Touring-oriented tires often prioritize lower road noise and a more compliant ride, while more aggressive performance designs may trade some comfort for sharper steering response. Wheel diameter also matters: lower-profile tires on larger wheels generally have less sidewall available to absorb impacts.
For a daily-driven Fusion Hybrid, matching the correct factory-size tire and maintaining proper inflation is usually a better starting point than changing sizes solely for appearance.
Before You Buy: Fitment Checklist
- Check the driver’s-door tire placard for the exact factory tire size and recommended cold inflation pressure.
- Read the complete tire size, not just the wheel diameter.
- Verify load index and speed rating against the vehicle’s requirements.
- For wheels, confirm diameter, width, bolt pattern, offset, and hub bore.
- Check brake and suspension clearance before changing from the original wheel specifications.
- Confirm TPMS compatibility when replacing wheels or sensors.
- Do not assume another Ford Fusion trim uses the same tire size.
- Have tires professionally mounted and balanced if you do not have the proper tire-service equipment.
Frequently Asked Questions
What Tire Size Does a 2019 Ford Fusion Hybrid Use?
It depends on trim. Factory configurations include P225/50R17 on the Hybrid SE, 235/50R17 on the Hybrid SEL, and 235/45R18 on the Hybrid Titanium. Because equipment can vary, confirm the size printed on your own vehicle’s tire placard before ordering.
Will 235/45R18 Fit Every 2019 Fusion Hybrid?
No. It should not be treated as a universal size for every 2019 Fusion Hybrid. It is appropriate when your vehicle is equipped and specified for 235/45R18 tires. Moving a 17-inch-equipped vehicle to an 18-inch tire requires the correct wheel and complete fitment verification, not just purchasing a different tire size.
Can I Replace Only One Damaged Wheel?
Often you can replace a single damaged wheel if the replacement matches the required diameter, width, bolt pattern, offset, hub bore, load capability, and brake clearance. Matching the original specification is especially important when replacing only one wheel.
How Does Tire Pressure Affect Hybrid Efficiency?
Underinflation increases rolling resistance and can contribute to uneven wear, extra heat buildup, and less predictable handling. Use the vehicle manufacturer’s recommended cold pressure shown on the door-jamb placard and check it regularly with an accurate gauge.
Can I Use Winter Tires Year-Round on a Fusion Hybrid?
Winter tires are optimized for cold conditions and generally wear faster in warm weather. If your climate has a warm season, switching back to a suitable all-season or summer tire can preserve the winter set and provide more appropriate warm-weather handling.
Can the Wrong Wheel or Tire Size Affect Vehicle Systems?
Yes. Significant changes to overall tire diameter, improper wheel offset, poor clearance, or incorrect TPMS equipment can create problems with fitment and may affect speedometer accuracy, tire-pressure monitoring, or the behavior of systems that rely on wheel-speed information. Use verified wheel and tire specifications rather than choosing by appearance alone.
Are Run-Flat Tires Automatically a Direct Replacement?
No. A run-flat tire still needs the correct size, load capability, speed rating, and wheel compatibility. Run-flat construction can also change ride characteristics, so confirm full fitment rather than assuming any same-size run-flat tire is automatically appropriate.
Final Recommendation
If your 2019 Ford Fusion Hybrid specifies 235/45R18: The Goodyear Eagle Touring is the relevant tire choice from the supplied products and offers an all-season touring design suited to everyday road use.
If you need a 17-inch replacement wheel: The 17×7.5-inch silver wheel may be useful when its 5×108 bolt pattern, 55 mm offset, 63.4 mm hub bore, and OE references match your current wheel requirements.
If your Fusion Hybrid uses P225/50R17 or 235/50R17 tires: Do not buy one of the removed mismatched sizes simply to use a product from this list. Confirm your placard size and choose a tire manufactured in that exact required specification.
