Disclosure: As an Amazon Associate, we earn from qualifying purchases. If you click a link on this page and make a purchase, we may receive a small commission at no extra cost to you.
Buying welding electrodes in a 60-pound lot only makes sense if the rods match your machine, work, and storage setup. The Findmall E7018 welding rod package combines six 10-pound boxes of 1/8 x 14-inch carbon-steel stick electrodes intended for fabrication, maintenance, and repair work. Its main attractions are bulk quantity, AC/DC compatibility, and E7018-type operation, but the large package also demands careful moisture control. This review helps you decide whether that balance fits your shop or jobsite.
Quick Verdict
Rating: Recommended with caveats
Best For: Fabricators, maintenance shops, and frequent stick welders who can use and store a 60-pound supply correctly.
Bottom Line: You get a practical bulk supply of 1/8-inch E7018 electrodes with AC/DC compatibility. The tradeoff is that a six-box purchase makes storage discipline more important, and buyers needing certified consumables should confirm documentation before using them on code-governed work.
| Specification | Detail |
|---|---|
| Brand | Findmall |
| Electrode classification | E7018, as listed by current sellers |
| Product type | Shielded metal arc welding (stick) electrode |
| Diameter | 1/8 inch |
| Length | 14 inches |
| Total quantity by weight | 60 lb |
| Package format | Six 10-lb boxes |
| Electrode material listing | Carbon steel |
| Power-source compatibility | AC or DC |
| Typical listed uses | Metal fabrication, maintenance, and repair |
| Storage consideration | Low-hydrogen electrodes need protection from moisture after opening |
What Is the Findmall E7018 Welding Rod?
The Findmall package is a bulk supply of 1/8-inch-diameter, 14-inch-long stick welding electrodes sold as E7018. You receive six 10-pound boxes for a total of 60 pounds, so this is aimed more at repeated shop or field use than an occasional one-off repair.
Seller information describes the rods for carbon-steel welding and lists compatibility with both AC and DC power sources. The same listings emphasize relatively low spatter, stable welding, and easier slag removal as intended performance characteristics.
The most important buying detail is the package size. Sixty pounds can be useful when you consume electrodes regularly, but it can be excessive if you weld only a few times a year. Once low-hydrogen electrodes are exposed to humid air, storage becomes part of maintaining their intended performance.
Before You Buy: Do not assume the E7018 label alone proves that this exact Findmall package satisfies your project’s required AWS, structural, pressure-vessel, bridge, or other code documentation. For regulated work, verify the required certificate, lot information, hydrogen designation, and welding procedure with your employer, inspector, engineer, or consumable supplier.
Who Should Buy It?
Best For
- Shops that regularly consume 1/8-inch E7018 electrodes.
- Maintenance and repair crews working mainly with suitable carbon-steel applications.
- Buyers who already have appropriate stick-welding equipment and dry electrode storage.
Skip If
- You only need a few pounds of electrodes for occasional home repairs.
- Your project requires documented consumable certifications that the seller has not provided.
- You cannot keep opened low-hydrogen electrodes protected from moisture.
Size and Bulk Packaging
Each rod is listed at 1/8 inch in diameter and 14 inches long. That is a common working size for stick welding, but you still need a machine capable of running the electrode under the conditions required for your joint, position, base-metal thickness, and procedure.
The six-box layout is more convenient than one loose 60-pound container because you can work through the supply in smaller portions. However, the seller information we verified does not establish that each box is hermetically sealed or carries a specific moisture-resistance rating. Treat storage as a separate requirement rather than assuming the retail carton protects exposed rods indefinitely.
Arc Performance and Weld Quality
The Findmall listings describe a stable arc, relatively small spatter, and easier slag removal. Those are useful traits when you want to spend less time cleaning the finished bead and more time welding, particularly during repetitive fabrication or repair work.
Actual results still depend heavily on joint preparation, machine output, polarity, arc length, travel speed, electrode condition, and operator technique. A rod that has absorbed moisture or is run outside an appropriate operating range can behave very differently from a dry rod used with a suitable procedure.
You should therefore treat seller performance claims as a starting point, not a guarantee that every weld will produce the same bead profile or slag behavior.
AC and DC Compatibility
Current seller information lists these Findmall E7018 rods for use with AC or DC power sources. That broad compatibility can be helpful when a shop has more than one stick welder or when you need flexibility between bench and field equipment.
Do not choose amperage from the electrode length alone. The proper setting depends on electrode diameter, polarity, welding position, joint design, base metal, and the guidance for your machine and consumable. Begin with the applicable product or procedure information and fine-tune only within a safe, approved range.
Pro Tip: Open one box first and confirm arc behavior, slag release, bead shape, and your preferred machine settings before exposing more of the 60-pound supply to shop air.
Storage and Moisture Control
Storage is one of the biggest practical considerations with E7018-type low-hydrogen electrodes. Once exposed, low-hydrogen coatings can absorb moisture from the air. Excess moisture can affect arc behavior and may contribute to weld-quality problems.
Keep unopened packages dry and protect opened electrodes according to the consumable manufacturer’s instructions and the welding procedure you are following. Professional low-hydrogen electrode systems often use heated holding ovens and defined exposure limits, especially for code work.
Do not improvise a baking or redrying cycle based only on internet advice. If electrodes have been exposed to high humidity, water, or uncertain storage conditions, follow documented manufacturer or procedure requirements before putting them back into service.
How It Performs in Real Use
For General Fabrication
The 60-pound format makes the most sense when you repeatedly weld carbon-steel parts and can consume electrodes at a steady rate. Six separate boxes make it easier to manage inventory than one large open supply.
For Maintenance and Repair
AC/DC compatibility gives you flexibility when the maintenance shop has different stick welders available. The seller-listed stable arc and low-spatter characteristics can also be useful on routine repair work, provided the electrode condition and welding parameters are right.
For Jobsites and Mobile Crews
Bulk quantity can reduce how often you restock, but transporting 60 pounds of electrodes is less convenient than carrying one 5- or 10-pound package. Moisture exposure is also harder to control when boxes move between trucks, outdoor areas, and humid storage locations.
For Code-Governed Structural Work
The E7018 classification may look suitable for many structural applications, but classification alone is not enough for every job. You may need manufacturer certificates, lot traceability, hydrogen designation, approved consumables, or specific procedure documentation. Verify those requirements before using this product on critical work.
Welding Safety and Handling
Stick welding exposes you to intense arc radiation, heat, sparks, fumes, and hot metal. Use an appropriate welding helmet, gloves, flame-resistant clothing, and other protection required for your work environment.
Provide adequate ventilation and follow the electrode packaging, safety data information, equipment manual, and workplace rules. Welding fumes and gases can be hazardous, particularly in enclosed or poorly ventilated areas.
Also confirm that the base metal is suitable to weld and free of coatings or contaminants that can create additional hazards when heated.
Pros and Cons
Pros
- Large 60-pound supply for frequent welding work.
- Six 10-pound boxes make the bulk quantity easier to manage.
- 1/8 x 14-inch E7018 format is clearly identified in current listings.
- Seller lists compatibility with both AC and DC power sources.
- Intended for fabrication, maintenance, and repair applications.
Cons
- Sixty pounds is excessive for occasional welders.
- Low-hydrogen electrodes require careful moisture management after opening.
- Verified retail information does not establish project-specific certifications or code approvals for this exact package.
Is It Worth the Price?
This Findmall package is best viewed as a bulk-value option rather than a small DIY purchase. You are buying 60 pounds at once, so the value depends on whether your shop can use that quantity before storage and handling become a problem.
It is worth considering if you regularly use 1/8-inch E7018 electrodes and would otherwise buy repeated 10-pound boxes. The value is weaker for occasional users because a smaller package reduces upfront commitment and makes moisture management easier.
For professional work, price should not outweigh documentation requirements. If your procedure requires a particular hydrogen designation, manufacturer approval, certificate, or lot traceability, confirm those details before treating this bulk package as a substitute for a documented industrial consumable.
How It Compares to Alternatives
If you want more extensive published technical documentation, established welding brands such as Lincoln Electric and ESAB offer E7018-family electrodes with manufacturer datasheets, stated operating ranges, storage information, and specific classification details.
The Findmall package makes the most sense when your priority is a large 60-pound supply of 1/8-inch electrodes for routine fabrication and maintenance. A more heavily documented alternative may be the better choice when consumable traceability, formal approvals, or procedure-specific data matter more than bulk quantity.
Frequently Asked Questions
How many welding rods are included?
The package is sold by weight rather than a stated individual rod count. You receive six 10-pound boxes for a total of 60 pounds of 1/8 x 14-inch E7018 electrodes.
Can the Findmall E7018 rods run on AC and DC welders?
Yes. Current seller information lists the product for AC or DC use. You should still confirm the correct polarity and operating settings for your machine, joint, material, and welding procedure.
Do E7018 rods need special storage?
Low-hydrogen electrodes should be protected from moisture after opening. For professional or code-governed welding, follow the consumable manufacturer’s handling instructions and your approved procedure rather than relying on ordinary room storage.
Are these rods certified for critical structural welding?
The retail listings identify them as E7018, but the sources reviewed did not provide project-specific approval documents, lot certificates, or a verified H4/H8 designation for this exact package. Check the documentation required by your welding procedure, inspector, or engineer before critical use.
Can these electrodes weld aluminum?
No. This product is listed as a carbon-steel E7018 stick electrode, not an aluminum welding consumable. Use a process and filler metal specifically matched to the aluminum alloy and application.
What amperage should I use with the 1/8-inch rods?
The exact Findmall retail information reviewed does not provide a verified amperage range for this package. Use your welder manual, consumable instructions, and applicable welding procedure because the correct setting changes with polarity, position, material thickness, and joint design.
Is the 60-pound package a good choice for beginners?
A beginner can learn with suitable E7018 electrodes, but buying 60 pounds is a large commitment before you know how much you will use. A smaller box may be easier for practice, storage, and testing compatibility with your welder.
The Bottom Line
The Findmall E7018 60-pound package is worth considering if you regularly use 1/8 x 14-inch stick electrodes for carbon-steel fabrication, maintenance, or repair and can store opened low-hydrogen rods correctly. Its main strengths are bulk quantity, six-box packaging, and AC/DC compatibility, while its biggest limitations are the amount you must store and the lack of verified project-specific certification details in the retail information reviewed.
If you weld only occasionally or need formally documented consumables for critical work, a smaller or more thoroughly documented E7018 product may be the better purchase.
Ready to Buy?
Check the latest product details and package information before you decide.
