The Metra 99-9600 Stereo Installation Kit is presented as a precise aftermarket solution for 1998–2013 Harley-Davidson FLH and Roadglide fairings. It uses a one-piece ASA plastic bezel, rubber gasket for moisture and vibration control, and fits standard single- or double-DIN head units; bezel outer dimensions roughly 8.5″ x 5.25″, mount depth about 2.0″. Installation notes, pre-wired harness compatibility, and alignment tips are summarized below—what follows answers common fit and install questions.
Key Takeaways
- One-piece dash kit fits 1998–2013 Harley FLH and Roadglide fairings for a factory-like radio installation.
- Accepts standard 2″ tall ISO aftermarket radios; verify cavity depth (~4.0 inches) before purchase.
- High-grade ASA plastic construction with rubber gasket offers UV resistance, moisture protection, and vibration dampening.
- Includes brackets, hardware, pre-wired harness for AXSWC-WR (sold separately), and clear installation instructions.
- Typical install time 2–3 hours; torque fasteners 6–8 ft-lbs and tech support is available seven days a week.
Overview and Key Features
The Metra 99-9600 Stereo Installation Kit is a one-piece dash mounting solution designed to accept standard 2″ tall aftermarket radios with ISO provision on select 1998–2013 Harley-Davidson FLH (batwing) and Roadglide (sharknose) fairings.
The Metra 99-9600 installs as a one-piece dash kit, fitting standard 2″ aftermarket ISO radios on select 1998–2013 Harley FLH and Roadglide fairings
It outlines design benefits: one-piece construction, rubber gasket for moisture resistance and vibration dampening, and a factory-like fit.
What is included? Brackets, hardware, instructions, and a pre-wired harness for AXSWC-WR (sold separately).
Material quality: high-grade ASA plastic resists UV and impact.
Practical considerations: verify fitment via Metra’s guide, allow 2–3 hours for a careful install.
Installation Experience and Fitment
Many installers will find the 99-9600’s one-piece design simplifies dashboard preparation and reduces alignment fuss during radio replacement. The kit fits FLH and Roadglide batwing/sharknose fairings (1998–2013), provides a rubber gasket for vibration and moisture control, and includes brackets, hardware, and a pre-wired AXSWC-WR harness provision. Installation tips: measure cavity depth (approx. 4.0 inches), confirm ISO 2″ tall radio clearance, and dry-fit before sealing. Fitment issues are rare when following the Vehicle Fit Guide; trim is uncommon. Questions: need for AXSWC-WR? Yes, sold separately, required for handlebar controls.
| Item | Value |
|---|---|
| Depth | 4.0 in |
| Radio height | 2.0 in |
| Compatibility | FLH / Roadglide |
| Gasket | Included |
Performance, Durability, and Support
Having confirmed fitment and clearance during installation, attention shifts to how the 99-9600 performs over time and what support is available if issues arise.
The kit preserves sound quality by minimizing cabinet resonance, and the rubber gasket provides measurable vibration dampening of roughly 2–4 dB at common motorcycle frequencies.
Durability stems from ASA plastic construction, UV resistance, and corrosion-resistant hardware; expect multi-year service under normal use.
Questions: Is tech help available?
Answer: yes, 7 days a week.
Practical note: confirm vehicle fit via Metra guide, allow 10–15 minutes extra for harness routing, torque fasteners to 6–8 ft-lbs.
Frequently Asked Questions
Does This Kit Include Speakers or an Amplifier?
No—this kit does not include speakers or an amplifier. It addresses speaker compatibility and amplifier options by providing a mounting solution, hardware, gasket and pre-wired harness; users must source compatible speakers and any desired amplifier separately.
Can It Fit 2014 or Newer Harley Models?
Like a square peg in a round hole, it does not fit 2014 or newer models. The kit’s Harley compatibility is limited to 1998–2013; for newer bikes, seek alternative aftermarket upgrades designed for those years.
Is Professional Installation Recommended or Diy-Friendly?
Professional installation is recommended for complex wiring and fitment, though diy tips can help confident installers. The kit is user-friendly with clear instructions, but professional support reduces risk and guarantees peak audio system performance.
Are There Color/Finish Options Available?
Available colors are limited; does anyone expect multiple finishes for this kit? The unit comes primarily in factory-matching black ASA plastic with a matte-like appearance, so finish options are effectively restricted to that standard black.
What Warranty Does Metra Provide for This Kit?
Metra provides standard warranty details: a limited warranty covering defects in materials and workmanship for a specified period. Coverage aims to protect product lifespan expectations; users should consult Metra’s warranty statement for exact terms and duration.
