Disclosure: As an Amazon Associate, we earn from qualifying purchases. If you click a link on this page and make a purchase, we may receive a small commission at no extra cost to you.
Ring Interchangeable Faceplate in Polished Mocha for Wired Doorbell Plus (2nd Gen) Review
If the default faceplate on your Ring Wired Doorbell Plus (2nd Gen) clashes with your home’s exterior colors, you have a simple fix available. The Ring Interchangeable Faceplate in Polished Mocha lets you swap the visible front in seconds with no tools or wiring changes. This review examines whether the accessory delivers a clean color match, easy installation, and real visual improvement for owners of this specific model.
Our Verdict
Rating: 8/10
Best For: Owners of the Ring Wired Doorbell Plus (2nd Gen) who want to quickly align their doorbell’s appearance with their home’s exterior color scheme.
Bottom Line: A straightforward snap-on accessory that improves visual cohesion with minimal effort. It offers good value for model-specific owners but provides only cosmetic benefits and works with just one Ring doorbell generation.
| Specification | Detail |
|---|---|
| Brand | Ring |
| Model | Interchangeable Faceplate for Wired Doorbell Plus (2nd Gen) |
| Color / Finish | Polished Mocha |
| Dimensions | 5.5 inches × 3.5 inches |
| Installation | Snap-on; uses push-pin tool included with doorbell for removal |
| Compatibility | Ring Wired Doorbell Plus (2nd Gen) only |
| Weather Resistance | Designed for outdoor use |
| Primary Benefit | Aesthetic customization and color matching |
What Is the Ring Interchangeable Faceplate in Polished Mocha?
The Ring Interchangeable Faceplate in Polished Mocha is an official accessory made specifically for the Ring Wired Doorbell Plus (2nd Gen). It replaces the default front cover so the visible portion of your wired video doorbell better matches your home’s exterior colors and materials.
Ring offers these faceplates in multiple finishes to give owners a low-effort personalization option. The Polished Mocha version features a warm, rich brown tone with a subtle polished sheen. At 5.5 inches wide by 3.5 inches tall, it aligns precisely with the 2nd Gen model’s dimensions.
This part adds no new camera, motion detection, or chime functionality. Its purpose is purely visual improvement through color coordination.
Who It’s For
- Homeowners with a Ring Wired Doorbell Plus (2nd Gen) whose current faceplate color clashes with their house paint, brick, siding, or trim.
- People preparing to sell their home or hosting events who want a quick, inexpensive curb appeal refresh.
- DIYers who prefer simple snap-on upgrades that require no drilling, wiring, or special tools.
Who Should Skip It
- Owners of Ring Wired Doorbell Pro (3rd Gen), battery-powered models, or earlier generations, because dimensions and mounting differ.
- Anyone expecting functional upgrades such as better weather sealing, camera protection, or lighting; this part changes appearance only.
- Buyers who want many color choices or a universal fit across multiple Ring doorbell models.
Design and Color Integration
The Polished Mocha finish delivers a warm neutral brown that avoids looking stark against most home exteriors. It pairs especially well with earth tones, warm grays, beiges, and certain wood or stone accents common in residential architecture.
Because it is an official Ring part, the faceplate maintains the clean lines and proportions of the original doorbell design. Edges align flush without the gaps sometimes seen with third-party covers.
Ring selected materials for outdoor durability. The finish resists fading from sunlight and holds up to normal rain and humidity when the unit is mounted correctly on the compatible model.
Installation Process and Ease of Use
Installing the Ring Interchangeable Faceplate takes less than a minute for most people. You need only the push-pin tool that ships with your Ring Wired Doorbell Plus (2nd Gen).
| Step | Description | Tips |
|---|---|---|
| 1. Prepare | Gather the push-pin tool that came with your doorbell. | Work with the doorbell already mounted and powered. |
| 2. Align | Position the new faceplate over the front of the doorbell. | Check that it sits evenly on all sides before pressing. |
| 3. Snap | Press firmly until you feel it seat securely. | Listen for a light click; give a gentle tug to confirm fit. |
| 4. Remove (if needed) | Insert the push-pin into the small hole and gently release. | Handle the faceplate carefully to avoid scratches during removal. |
Customization and Home Integration
Many homeowners choose this faceplate because it lets them coordinate the doorbell with their front door, trim, or overall exterior palette without painting the device or buying a new doorbell.
The warm mocha tone can soften the look of a tech gadget on traditional or transitional homes. On modern homes with darker or neutral palettes, it adds subtle warmth without drawing attention.
Because the change is fully reversible, you can experiment with different official Ring faceplates over time as your exterior colors evolve or if you repaint.
Durability and Maintenance
Ring engineered the faceplate for typical outdoor conditions. It holds up to temperature swings, moisture, and UV exposure common for a front-door installation on the compatible model.
Cleaning requires only a soft microfiber cloth and mild soap. Avoid abrasive pads or strong solvents that could dull the polished finish.
How It Performs in Real Use
Matching a Suburban Home Exterior
On homes with beige, taupe, or light brown siding, the Polished Mocha faceplate blends smoothly and reduces the visual contrast of the default black or silver plate. The upgrade often goes unnoticed except as an improvement in overall cohesion.
Traditional or Brick Homes
Against red or earth-tone brick, the warm brown tone grounds the doorbell and prevents it from looking like an afterthought. The polished sheen catches light subtly without creating glare.
Rental or Quick Refresh Situations
Renters or homeowners who want a fast change before photos or showings can complete the swap in under two minutes and revert it later if needed. No permanent alteration occurs to the doorbell itself.
Pros and Cons
Pros
- Exact fit for Ring Wired Doorbell Plus (2nd Gen) delivers clean, professional alignment with no gaps.
- Snap-on installation requires no tools beyond the included push-pin and takes under a minute.
- Warm Polished Mocha finish complements many popular home exterior color schemes.
- Low-cost, reversible upgrade that improves perceived curb appeal without replacing the full doorbell.
- Official Ring part maintains warranty compatibility and precise engineering.
Cons
- Works only with the Wired Doorbell Plus (2nd Gen); incompatible with Pro models or other generations.
- Delivers cosmetic improvement only; no change to camera performance, motion detection, or security features.
- Limited color selection compared to some universal aftermarket covers.
Is It Worth the Price?
The Ring Interchangeable Faceplate in Polished Mocha sits in the affordable accessory tier. For owners of the exact compatible model, it represents strong value because it solves a specific visual mismatch at low cost and effort.
Compared with repainting the existing faceplate or purchasing an entirely new doorbell in a different color, this option wins on speed and reversibility. The investment pays off most for style-conscious homeowners who notice small details in their curb appeal.
If your doorbell already matches your home well, you may not need this upgrade. The benefit is targeted rather than universal.
How It Compares to Alternatives
If you own a different Ring model, consider official faceplates made for that specific generation or explore third-party covers (though fit quality and longevity vary). For the Wired Doorbell Plus (2nd Gen), the official Polished Mocha version remains the safest choice for perfect alignment and long-term durability.
Buyers who want more dramatic changes sometimes replace the entire doorbell with a newer model that offers additional colors or features out of the box.
Frequently Asked Questions
Is the Polished Mocha Faceplate Weather-Resistant?
Yes. Ring designs the faceplate for outdoor mounting on the Wired Doorbell Plus (2nd Gen). It withstands typical rain, sun, and temperature changes when installed correctly.
Can I Use This Faceplate With Other Ring Doorbells?
No. The dimensions and mounting design are specific to the Wired Doorbell Plus (2nd Gen). Other models require their own faceplates.
What Materials Is the Faceplate Made From?
Ring uses durable, weather-resistant materials selected for outdoor longevity. The polished finish maintains its appearance through normal exposure.
How Do I Clean the Faceplate Without Damaging It?
Wipe it with a soft microfiber cloth and mild soap solution. Skip abrasive cleaners or pads that could scratch the surface.
Where Can I Purchase the Polished Mocha Faceplate?
You can buy it from Amazon and authorized Ring retailers. Confirm your doorbell model is the Wired Doorbell Plus (2nd Gen) before ordering.
The Bottom Line
The Ring Interchangeable Faceplate in Polished Mocha earns an 8/10 rating for owners of the Wired Doorbell Plus (2nd Gen) who value quick, clean aesthetic updates. It delivers exactly what it promises: a model-specific color swap that improves visual harmony with minimal time and cost. If your current faceplate clashes with your home, this accessory offers a practical solution. Owners of other Ring models or those seeking functional upgrades should look elsewhere.
Ready to Buy?
