Disclosure: As an Amazon Associate, we earn from qualifying purchases. If you click a link on this page and make a purchase, we may receive a small commission at no extra cost to you.
Weak bass can make an otherwise good factory stereo sound thin, but a large subwoofer box may take up cargo space you need. The Rockville SS8P + RWK10 bundle pairs an 8-inch powered subwoofer with a 10-gauge wiring kit in a package built for compact vehicle installations. Its 2.8-inch height, speaker-level inputs, and bass controls are useful, while the 100W RMS rating limits how much output you should expect. This review covers fit, wiring, tuning, and value so you can decide if it is enough for your car.
Quick Verdict
Editorial Verdict: 8/10, Recommended with caveats (specification-based)
Best For: Drivers who want a compact powered subwoofer that works with factory or aftermarket car audio systems.
Bottom Line: The SS8P combines a small cast-aluminum enclosure, a built-in amplifier, factory-stereo input options, and an RWK10 kit. It is best suited to filling in missing bass, not delivering the heavy output of a large subwoofer system.
| Specification | Detail |
|---|---|
| Brand | Rockville |
| Model | SS8P + RWK10 |
| Product type | 8-inch powered under-seat car subwoofer bundle |
| Power | 100W RMS / 400W peak |
| Subwoofer dimensions | 11.4 x 8.3 x 2.8 inches |
| Enclosure | Cast aluminum, 2.8-inch low-profile design |
| Frequency response | 20Hz to 150Hz |
| Low-pass filter | Adjustable 50Hz to 150Hz |
| Bass boost | 0 to 12dB at 45Hz |
| Phase control | 0° / 180° switch |
| Inputs | Low-level RCA and high-level speaker inputs with auto turn-on |
| Included kit | RWK10 10-AWG kit, 17-foot 100% copper RCA cable, power/ground wire, inline fuse holder, 40A kit fuse, accessories |
| Protection | Thermal, short-circuit, and overload protection listed in SS8P manual |
| Installation caution | Confirm correct power-wire size and fuse values for your unit before connecting |
| Included controls | Remote bass level knob |
| Warranty | 1-year warranty advertised by Rockville; check seller terms |
Review method: This assessment uses Rockville’s published specifications and installation information. It does not claim hands-on sound measurements or installation testing.
What Is the Rockville SS8P Bundle?
The Rockville SS8P is an all-in-one powered car subwoofer, which means the 8-inch driver and amplifier are built into the same compact enclosure. That removes the need to find space for a separate amplifier and makes it easier to add low-frequency support to a sedan, truck, SUV, or other vehicle with limited room.
The bundle adds the RWK10 10-AWG amplifier wiring kit, including a 17-foot copper RCA cable and an inline fuse holder. The SS8P accepts either RCA line-level signals or high-level speaker signals, so it can work with many aftermarket head units and factory radios that lack RCA outputs. You still need to confirm safe power wiring and a usable signal source for your exact vehicle.
Key Takeaways
- The 8-inch SS8P is rated at 100W RMS and 400W peak, making it a compact bass upgrade rather than a competition-style subwoofer.
- The enclosure measures 11.4 x 8.3 x 2.8 inches, so you can place it under many seats, but you should measure your exact clearance before buying.
- You can tune the bass with a 50Hz to 150Hz low-pass filter, 0 to 12dB bass boost at 45Hz, a 0°/180° phase switch, and the included remote level knob.
- High-level inputs with auto turn-on help with factory-radio integration, while RCA inputs support common aftermarket setups.
- The RWK10 kit includes 10-AWG wiring, a 17-foot copper RCA cable, and fuse hardware; check the SS8P manual before selecting wire and fuse ratings.
Who Should Buy It?
Best For
- Drivers who want stronger bass without giving up trunk or cargo space.
- Factory-audio owners who need high-level inputs and automatic signal sensing.
- DIY installers who want the powered subwoofer and a 10-gauge wiring kit in one bundle.
Skip If
- You want very high output that shakes the vehicle or competes with a larger trunk subwoofer.
- Your seat rails, vents, wiring, or floor shape do not leave enough room for an 11.4 x 8.3 x 2.8-inch enclosure.
- You need a marine-rated or weatherproof subwoofer for an exposed installation.
Before You Buy: “Under-seat” is not a fit guarantee. Measure clear space with the seat at all positions, and check vents, seat wiring, rails, and mounting points. Also confirm your vehicle’s audio signal and the correct fuse/wire requirements before installation.
Design and Build Quality
The SS8P uses a cast aluminum enclosure rather than a plastic case. That matters under a seat because the enclosure also helps manage heat from the built-in amplifier while keeping the package rigid. Its 2.8-inch height is the key design advantage, and the 11.4 x 8.3-inch footprint remains much smaller than a conventional boxed subwoofer.
Rockville includes mounting hardware, but the spot you choose must still allow airflow and prevent movement during hard braking. Avoid seat-track paths, floor vents, and areas near airbag wiring. The metal case is not a weatherproof rating, so do not mount it where it could get wet.
Sound Performance and Features
The SS8P is rated at 100W RMS and 400W peak. RMS power is the more useful number for everyday expectations. In practical terms, the SS8P is designed to add weight and definition to bass that factory door speakers often cannot reproduce well, not to replace a large high-powered subwoofer system.
Rockville lists a 20Hz to 150Hz frequency response and a signal-to-noise ratio above 90dB. That frequency range is a specification, not proof that the small driver can play 20Hz loudly in your vehicle. The adjustable 50Hz to 150Hz low-pass filter helps you blend bass with the door speakers instead of making it seem to come from below your seat.
Bass boost runs from 0 to 12dB at 45Hz, and the phase switch provides 0° or 180°. These settings can help the subwoofer work with your door speakers, although neither control creates extra amplifier headroom. The included remote bass knob lets you lower the level on bass-heavy recordings without reaching under the seat.
Installation and Compatibility
The SS8P supports both low-level RCA inputs and high-level speaker inputs with auto turn-on. RCA is the usual choice when your head unit has a dedicated subwoofer output. High-level inputs are useful when you are keeping a factory radio that lacks RCA preamp outputs.
With high-level input, auto turn-on can detect music signals and reduce the need for a separate remote lead. With RCA input, follow the manual’s remote-turn-on wiring instructions. Do not connect RCA and high-level inputs at the same time. The included bass remote adjusts level after setup.
Rockville lists 10-AWG SuperFlex power wire, a 17-foot 100% copper RCA cable, power/ground wiring, an inline fuse holder, a 40A fuse, and accessories for the RWK10. Mounting hardware and the remote bass knob come with the subwoofer. Do not assume every supplied wire or fuse is appropriate for every installation without checking the instructions for your exact SS8P version.
Pro Tip: Route power and signal wiring neatly and keep cables clear of seat tracks, sharp metal edges, pedals, and heat sources. Set the gain conservatively first, then tune the low-pass filter and bass level after the rest of the system is playing cleanly.
Installation Safety and Setup
Car-audio wiring connects to the vehicle electrical system, so correct conductor size, grounding, fuse placement, and secure routing matter. Check the SS8P manual for your exact unit before installation: the RWK10 bundle lists 10-AWG wiring and a 40A inline kit fuse, while available SS8P manuals describe a heavier power lead and different subwoofer fuse ratings. Do not replace the SS8P’s onboard fuse with the kit’s larger inline fuse or assume that the supplied 40A fuse is automatically correct for your setup.
Keep mounting screws and wiring clear of airbag components, seat sensors, moving mechanisms, and brake or fuel lines beneath the floor. Some vehicles may require special steps before disconnecting the battery or handling seat wiring. If the kit instructions and SS8P manual disagree, ask Rockville or a qualified installer to confirm the right parts and protection before powering the unit.
Included RWK10 Installation Kit Details
The RWK10 saves a separate shopping trip for basic installation materials. Rockville lists 10-AWG SuperFlex power wiring, a 17-foot 100% copper RCA interconnect, power/ground hardware, an inline fuse holder, and a 40A kit fuse. Those are kit contents, not a substitute for the SS8P model-specific wiring instructions.
With an aftermarket stereo, the RCA cable can carry audio from the head unit’s subwoofer output. A factory radio may need a speaker-level connection instead. In either case, plan the battery connection, ground point, remote-turn-on method, and safe cable path before taking interior trim apart.
How It Performs in Real Use
These scenarios describe likely use based on the SS8P’s design and power rating, not measured results from a test vehicle.
For a Factory Stereo Upgrade
High-level inputs let you retain many factory radios without adding a separate amplifier. However, some factory systems heavily filter or process the signal sent to door speakers. Check that the tapped speaker output actually carries the bass the SS8P needs.
For Small Cars and Tight Cabins
In a small sedan or hatchback, the 2.8-inch height can leave your trunk free for luggage. You still need enough room for the enclosure, cable connectors, airflow, and full seat movement. A flat floor alone does not guarantee a safe fit.
For Trucks and SUVs
In a pickup or SUV, the SS8P can add low-frequency support without a large cargo box. Its 100W RMS output will likely be less forceful in a roomy cabin than a more powerful enclosed system. Check rear-seat or under-seat mounting space rather than assuming the front seats will fit it.
For Mixed Music
The remote level control is useful when switching between songs with very different bass levels. Set your crossover and input gain during the initial tune, then use the remote for small day-to-day adjustments rather than turning up bass boost to solve a weak source signal.
Setup Tips for Better Results
- Measure before ordering: Check length, width, height, seat travel, floor vents, wiring plugs, and mounting points.
- Start with low bass boost: Heavy boost can make the system sound boomy or push the amplifier harder than necessary.
- Blend with your speakers: Start near 80Hz as a trial point, then adjust within the 50Hz to 150Hz range to suit your main speakers and cabin.
- Try the phase switch: Compare 0° and 180° from the driver’s seat and use the setting that gives smoother, stronger bass at your normal listening position.
- Secure the enclosure: Use a safe mounting point and keep the case and wires clear of moving seat hardware.
- Check the signal path: Choose either RCA or speaker-level input, not both, and follow the correct auto-on or remote-lead method.
Pros and Cons
Pros
- Compact 11.4 x 8.3 x 2.8-inch enclosure saves cargo space.
- Built-in 100W RMS amplifier avoids the need for a separate amp.
- High-level and RCA inputs support factory and aftermarket audio setups.
- Adjustable crossover, bass boost, phase, and remote level control give you useful tuning options.
- RWK10 bundle includes 10-AWG wiring, copper RCA cable, fuse hardware, and mounting accessories.
Cons
- 100W RMS is modest if you want very loud or hard-hitting bass.
- The 2.8-inch profile still will not fit every seat or floor layout.
- Published kit and subwoofer wiring/fuse details need careful checking before installation.
Is It Worth the Price?
The SS8P + RWK10 makes the most sense as a value-focused all-in-one upgrade. You are getting the powered 8-inch subwoofer, remote level control, mounting hardware, and a 10-gauge wiring kit rather than buying each part separately.
Its value is strongest when space and installation simplicity matter more to you than maximum output. If your goal is to fill in weak factory bass while keeping the trunk open, the bundle is worth considering. If you already know you want much stronger low-frequency output, spending more on a larger or more powerful under-seat model can save you from upgrading twice.
The bundle’s value also depends on what your vehicle already has. A built-in amplifier and an included wiring kit may reduce extra purchases, but a difficult factory-audio connection or a mounting problem can add cost. Check current seller details, return terms, and exact bundle contents before ordering.
How It Compares to Alternatives
Rockville’s USS8 stays in the slim 8-inch under-seat category but increases rated output to 150W RMS and 600W peak, so it is worth comparing if you want more power and can accept a slightly larger 2.9-inch-high enclosure. The Rockville SS10P moves to a 10-inch driver with 200W RMS and an approximately 3-inch profile, which makes more sense if stronger output matters more than the smallest footprint.
The SS8P bundle remains the space-first choice if 2.8 inches of height, the included wiring kit, and modest bass reinforcement matter more than maximum output. Compare full enclosure dimensions, not just driver diameter, before switching models.
Frequently Asked Questions
Can the SS8P work with a factory car stereo?
Yes. The SS8P has high-level speaker inputs with auto turn-on, so it can integrate with many factory systems that do not provide RCA preamp outputs. Vehicle-specific wiring and signal behavior can vary, so check your factory audio layout before installation.
Does it need a separate amplifier?
No. The amplifier is built into the SS8P enclosure. You still need proper power, ground, signal wiring, and fuse protection, but you do not need to mount a separate external amp.
Will the SS8P fit under every car seat?
No. The enclosure measures 11.4 x 8.3 x 2.8 inches, and seat rails, wiring, vents, carpet humps, and seat travel can reduce usable space. Measure the exact installation area before ordering.
What comes in the RWK10 bundle?
The bundle includes the SS8P powered subwoofer plus the RWK10 10-gauge installation kit. Rockville lists 100% copper RCA cabling, SuperFlex power wiring, power/ground wiring, an ANL fuse holder, fuse, accessories, remote bass control, and mounting hardware.
How much bass boost does it have?
The bass boost is adjustable from 0 to 12dB at 45Hz. Start low and add boost only if needed, because excessive boost can make bass sound less balanced and increase system strain.
Does the bundle include mounting hardware?
Yes. Rockville lists mounting hardware with the SS8P bundle. You still need to choose a mounting method and location that are safe for your specific floor, seat rails, and vehicle structure.
Is the SS8P suitable for a boat or exposed motorcycle installation?
It is sold as a car and truck powered subwoofer, not as a marine-rated or weatherproof model. For exposed or wet locations, choose equipment specifically designed and rated for marine or powersports use.
Can I use the RCA and high-level inputs together?
No. The SS8P manual warns against connecting low-level RCA and high-level speaker inputs at the same time. Use the connection type that matches your radio and follow the matching turn-on wiring instructions.
The Bottom Line
The Rockville SS8P + RWK10 is recommended with caveats if you want to add bass while keeping cargo space free. Its 2.8-inch cast-aluminum enclosure, built-in 100W RMS amplifier, and input options are practical strengths, but the output is modest and your vehicle’s fit and wiring details must be checked. Choose a more powerful model if hard-hitting bass is your top priority.



