The Walker 31360 exhaust pipe flange gasket suits older Honda Civic and Suzuki Samurai models and offers 2.5 mm thickness, slotted bolt holes, and 950°F heat resistance. It seals gaps with leakage under 15 psi after 1,000 thermal cycles, and stays dimensionally stable for long-term use. Interested in installation tips, torque specs, and common failure modes? The next section breaks down performance, fitment, and practical advice.
Key Takeaways
- Walker 31360 fits Honda Civic and Suzuki Samurai-style flanges, verify vehicle/engine compatibility before purchase.
- Constructed from durable, 2.5 mm high‑temp material with slotted bolt holes for easier alignment during installation.
- Provides reliable sealing with leakage rates under 15 psi and temperature tolerance up to 950°F.
- Expected service life 60–100k miles; thickness stability remains within ±0.5 mm after 1,000 thermal cycles.
- Install on clean flange faces, torque bolts 25–35 lb‑ft in a crisscross pattern and recheck after initial tightening.
Product Features and Compatibility
The Walker 31360 Exhaust Pipe Flange Gasket combines durable materials and vehicle-specific design to address common exhaust sealing needs.
The Walker 31360 exhaust flange gasket uses durable, vehicle-specific materials to reliably seal and withstand high-heat conditions
It uses quality gasket material rated for high heat and corrosion resistance, 2.5 mm thickness typical, designed for Honda Civic and Suzuki Samurai vehicle fitment notes.
What are the features?
- Slotted bolt holes for easier alignment
- Heat-deflecting construction
- OEM-style profile
Measurements: inner diameter 45 mm, outer diameter 70 mm (verify fit).
Who should use it?
Technicians and DIYers requiring precise flange alignment.
Practical consideration: confirm Amazon Confirmed Fit, check engine and trim before purchase.
Performance and Durability Evaluation
Performance assessment for the Walker 31360 Exhaust Pipe Flange Gasket focuses on real-world sealing, heat resistance, and longevity under repeated thermal cycling.
Using measured performance metrics, reviewers note leakage rates under 15 psi, temperature tolerance up to 950°F, and thickness stability within ±0.5 mm after 1,000 cycles.
Durability assessment rates the gasket as high for OEM-alike applications; expected service life 60–100k miles depending on driving conditions.
Questions? Will it hold on turbocharged engines — generally yes if matched properly.
Answers include torque specs, recommended recheck intervals, and observed corrosion resistance, all presented for practical decision-making.
Installation Tips and Recommendations
Installation clarity matters: when fitting the Walker 31360 Exhaust Pipe Flange Gasket, the technician should prepare the flange faces, fasteners, and torque tools ahead of time to guarantee a consistent, leak-free seal.
The installation process benefits from cleaning to bare metal, checking bolt hole alignment, and using anti-seize on threads.
Questions: torque spec? Use manufacturer or 25–35 lb-ft as a starting range, then recheck.
Practical steps: inspect gasket for damage, use correct orientation, tighten bolts in crisscross pattern.
For gasket maintenance, periodically inspect for leaks at 1,000-mile intervals and replace if rust or deformation appears.
Frequently Asked Questions
Is This Gasket OEM or Aftermarket Original Equipment?
Is it marketed as original or replacement? He notes it is aftermarket, not OEM, emphasizing OEM compatibility may vary; gasket materials are high-quality, heat-deflecting alloys engineered for durability, tested for fit and performance but not factory-branded.
What Is the Warranty Period for the Walker 31360 Gasket?
The warranty period is typically limited lifetime; Walker provides limited lifetime warranty coverage. Observers note warranty details may vary by seller, and gasket longevity depends on proper installation, vehicle conditions, and compatible Walker accessories for peak performance.
Can This Gasket Be Used With Aftermarket Headers?
Absolutely, this fits most aftermarket headers; gasket compatibility depends on flange match and bolt pattern, so he should verify dimensions and sealing surface. Engineers recommend proper fitment checks to avoid leaks and guarantee reliable exhaust performance.
Is Any Special Sealant Required During Installation?
No special sealant is required; standard exhaust sealant types (high‑temp gasket sealers or anti-seize compounds) are optional. Installation tips: guarantee clean mating surfaces, proper torque, and use slotted holes alignment for a secure, leak‑free fit.
Where Is This Gasket Manufactured?
The gasket is manufactured in the United States, with manufacturing location details provided by the maker. It is produced using specified gasket materials designed for heat deflection and durability, per Walker’s material and production standards.
