The YESWELDER TIG foot pedal (FP-5P-B) offers precise amperage control in a hand-free, battery-free design, weighing 5.85 lb with smooth travel and stable modulation; it fits specific machines like TIG-200P ACDC and TIG-205P, requires enough floor space for placement, and uses a gas contactor for torch control. What amperage range, cable length, and machine compatibility matter most for your setup — and is your workspace sized for a full-size pedal?
Key Takeaways
- Compatible with 5-pin torch control units like TIG-200P ACDC, TIG-205P, and YWT-200DC; verify your machine’s connector first.
- Hand-powered, battery-free design offers predictable, incremental amperage control for fine heat and puddle adjustments.
- Stable 5.85 lb construction and smooth modulation reduce operator fatigue and improve travel consistency.
- Users report reliable gas contactor activation and simple 5-pin hookup for straightforward installation.
- Limitations: bulky package size, cable/connector dependency, and incompatibility with non-5-pin torch control systems.
Key Features and Specifications
Although compact in design, the YESWELDER FP-5P-B foot pedal delivers precise amperage control for compatible TIG machines. The section outlines design features, specifications, and practical notes for buyers.
What are the key specs?
- Part number: FP-5P-B;
- weight: 5.85 lb;
- package: 13.15 x 7.91 x 6.65 in.
What about compatibility range? It fits TIG-200P ACDC, TIG-205P, YWT-200DC and other units with a 5-pin torch control.
Practical considerations: hand-powered operation, no batteries, simple installation, activates gas contactor when depressed. Intended for users needing steady, adjustable current control.
Performance and User Experience
When tested on compatible units, the YESWELDER FP-5P-B foot pedal delivers predictable, incremental amperage response, giving welders direct control over heat input and puddle behavior.
The reviewer notes stable modulation, a 5.85 lb build that stays put, and smooth travel for fine adjustments. User feedback and user testimonials cite reliable gas contactor activation and simple hookup with 5-pin torch control.
Reviewer praises stable modulation, hefty 5.85 lb build, smooth travel, and reliable 5-pin gas contactor activation
Practical considerations: cable length, pedal travel distance, and machine compatibility matter.
- Smooth, gradual amperage control for fine welds
- Sturdy construction, 13.15 x 7.91 x 6.65 in footprint
- Easy installation, no batteries
- Consistent repeatability under varied loads
Pros, Cons, and Buying Considerations
Building on the pedal’s tested performance and stable modulation, this section outlines the pros, cons, and buying considerations to help the reader decide if the YESWELDER FP-5P-B suits their workflow.
Pros:
- Precise amperage control, simple 5-pin compatibility, 5.85 lb weight for stability.
- No batteries required, easy installation, reduces operator fatigue.
Cons:
- Limited to compatible machines (TIG-200P ACDC, TIG-205P, YWT-200DC), cable/connector dependency.
- Bulkier package: 13.15 x 7.91 x 6.65 inches.
Buying considerations:
– Is 5-pin torch control required? Check machine compatibility, workspace size, and desired modulation range before purchasing.
Frequently Asked Questions
Is the Pedal Compatible With Non-Yeswelder TIG Machines?
Yes. The pedal is compatible with many non-YESWELDER TIG machines that accept a 5-pin torch control. Compatibility concerns persist; user experiences vary, so verifying machine control wiring and specifications before purchase is recommended.
Does It Include a Replacement Cable or Connector?
No, it does not include a replacement cable or connector. With a 4.4-star average, the description suggests customers seek replacement options independently; they should confirm cable specifications (5-pin torch control) before sourcing compatible aftermarket parts.
Can It Be Used for Plasma Cutting Machines?
No, it cannot be used for plasma cutting machines. The response clarifies pedal versatility is limited to TIG torches with 5-pin control; adapting it for plasma cutting would require incompatible controls and wiring, making substitution impractical.
Is There a Protective Cover for the Foot Pedal?
No dedicated protective cover is listed for the foot pedal. Users concerned about foot pedal durability can fabricate a custom cover; pedal maintenance tips include keeping it clean, dry, and stored away from impact or heavy debris when not in use.
Does the Pedal Come With a Warranty Card in the Box?
No — the box typically lacks a separate warranty card. Like a map without a compass, buyers are guided instead by online warranty details and customer support channels; consult seller or manufacturer for specific coverage and registration instructions.
Conclusion
In summary, the YESWELDER FP-5P-B foot pedal delivers precise amperage control, smooth travel, and reliable gas contactor activation for compatible TIG-200P ACDC and TIG-205P machines. Measure workspace: pedal weighs 5.85 lb and needs clear floor area for stable placement. One good turn deserves another: adjust travel and modulation for fine starts, consistent arcs, and repeatable welds. Questions? Consider compatibility, pedal placement, and shop layout before purchase.
